Get a Freelance Job

Need code added to CSS to fix format for legacy IE versions 5.5, 6 and 7. No FTP access.

I have several serial numbers to older versions that I have purchased over the past 10 years. I cannot find the CDs for them. I am changing computers. I have a set of CDs for MS Office but none of the serial numbers work for the version that I have. MS Office no longer supports the versions I purchased and does not carry older versions. I need someone who can either install a version of MS Office to my new computer OR copy the version I’m using from my old computer.

Hi Guys,

I have a homepage design in HTML I want to make it browser compatible, here are the details:-

Design is working fine in following browsers:-

Mozilla: 5.0 & above versions
Internet Explorer: 7.0
Internet Explorer: 9.0
Google Chrome: all versions

Requirement:-

I want to make it compatible in following browser’s versions too:-

Mozilla: 2.0
Mozilla: 3.0
Mozilla: 3.5
Internet Explorer: 8.0

You can check design here, it is one page HTML design:-
http://accounting-news-online.com/prnetwork/index.html

We want you to create 2.0 properties that you will fill with content that is supplied by us..You will have an article that you spin into 3 versions(one for each propertie..alter, headings and paste them into the 2.0 property you have created.

You need to be able to create six 2.0 properties at the following sites:

- WordPress
- Squidoo
- Hubpages

The subjects for each property will be these:

Business
Health
Science and Education
Music and Entertainment
Internet and Software’s
SEO

You will have access to the following software’s and know how to use them:

AMR-for submission of spun versions of the 3 spun articles to article directories

The Best Spinner – To spin the articles

BMD – to blast each page you created with bookmarks

Scrapebox – to blast the pages you created with blog comments

This is a project that will last for a long time, we currently have 100 blogs that will use the 18 2.0 properties on a regular basis.

We look to hire someone who can do this work effectively meaning that you have references from similar work.

THIS IS WHAT YOU WILL DO WITH EACH ARTICLE YOU GET FROM US
1. Spin the article in to 3 versions(from the original) The versions should be spun to 40% uniqueness and then manually rewritten(meaning you will rewrite awkward formulations, write new headings and subheadings for each article. Add 100 words manually to create more uniqueness + that the article shall be easily read by a human.

2. Paste the articles on the three 2.0 properties, link the article to target page and the root URL

3. Submit spun versions of the article to 300 article directories that will link back to the 2.0 pages you have created.

4. BLAST the three 2.0 articles with scrapebox(auto-approving niched blogs is the target – 1000 per blast) BLAST the article to social bookmark targets using BMD

5. Ping and submit RSS feeds to aggrivators.

You will be willing to work being effective at what you do(work 10 hours a day with this task)

YOU KNOW HOW TO DO THIS – DONT!!! BID IF YOU DONT HAVE EXPERIENCE.

Respond with PM and tell us why we should choose you. Explain your experience(not just “Hey Man I can do this, please choose me)

CLARIFICATION
You will only create 18 2.0 properties once and paste the articles you get form us in to three 2.0 pages each time(ex seo niched squidoo, hubpages and wordpress).

Each day you will be able to do 10 full article packages in step 1-5 from above description.

You will get paid 2 usd/completed package ie $20/day

Dont bid if you are not happy with the payment..If you can do more than 20 a day that is fine since you will get paid 2 usd/article package you complete.

We are in need of constant help from 2 people handling this so we will award 2 winners.

Simple job needs to be done ASAP.

I am in need of two HTML versions of the attached PSDs. I’m looking for someone who can start immediately and complete within a few hours. The HTML needed is not extensive. Willing to pay $30-$40 for this very simple job.

Any and all text (except in the logo) should be kept as text in the HTML template. Images should be used only when absolutely necessary.

Please reply with ONION as the first word of any reply to show you’ve read this.

Hello,

I need a logo and icons developed for my site. We have a mock-up of the site to give you an idea of what I need. Basically, we are newsletter based website that provides tips on how to save money.

See the mock up here: http://feddesk.com/fedsave/fedsave1.htm

Logo

I have a script that is not showing up. I have installed the database and uploaded all files. I think there might be a problem with the MySQL database but I am not sure.

I have 3 working versions of this script and 4 versions that are not working.

You can see a working version at: http://bit.ly/gbPut3

You can see a non-working version at: http://bit.ly/dTGjfc

You will need to find out why this version is not working and once you fix it, you will need to fix the other versions too. They all have the same problem.

If i choose your bid, you will need to start on this right away.

I need to create a 300×250 banner ad for a raw food product. I will need 4 different versions of the same ad, so I can test which version performs the best online. (all versions are 300×250) Each of the versions should be laid out differently. I will supply the ad copy, but you will supply the graphic images.

The banner should have an animated “Click here” button. (animated gif)
The file size cannot be greater than 50 kb. It is OK to restrict the use to Web activity.

Each of our 13 800-1000 words Articles needs a re-written or paraphrased version 1, 2, and 3 of same number of words. This is for the Unique Article Wizard.

There should be same number of paragraphs between the versions. Content in each version should be talking about same subject, exceot using different words. The 3rd paragraph in version 1 should discuss the same thing as the 3rd paragraph in versions 2, 3 and the original, for instance.

If content sounds a little adult-themed, tone down the versions to sound much more appropriate.

I need someone to create scalable vector versions of the six large icons on http://tools4shuls.inspiredonline.com/.

they must be as close to identical as possible, including the web 2.0 reflective nature of the buttons. the words infront of the icons do not need to be there, just the image itself. I can provide the original, smaller versions of them as layered photoshop files.

if vector files cannot be made, then I would like extremely large, hi res photoshop files — large enough for big banners.

final versions should be delivered in multiple vector formats.

project must be completed within 1 week of hiring and a sample of 1 hi-res or vector image (can be watermarked) must be sent to me to approve prior to working on the rest.

I am looking for a top notch graphic designer to design a custom Header for my WordPress site. I have my logo that I want to incorparate along with some other ideas I have. I will provide the sample. I have all the ideas. All you have to do is follow my instructions. I am not sure of the size I want . I’m looking for someone who can provide the following…

1) will submit different versions of logo for me to choose (preferable 2-3 different versions)
2) unlimited revisions on the final logo I choose
3) all for a price of around $30

I have attached what I want the header to look like. Basically me then my logo then my company name. Please provide in your PM how many versions you will create, and also show previous work that you have done, especially with Headers. If job is completed to my satisfaction, I would have another job for you.

I need animated banners to promote my online store. I need

720×98 three versions
776×65 two versions
468×60 one
160×600 two
125×125 two

each ad will have 3 transitions. main colors will be red and white. 2 versions will be of a christmas type theme. store item graphics will be from http://www.footballfanatics.com/partnerid/3529

I’ve a hand-drawn bear that needs to be changed for a logo. it’s now just a sketch in low quality and you need to paint it with ”bear” brown color and give me in 4 different versions. One of them should be the original one but cut from the background white and colored. but the other three versions you need to make up with some good idea (smiling or writing something…whatever you decide). It’s important that those 3 versions should look as if they were computer drawn and glossy. however, you should not change the body proportion, that’s very important!

Please also note that you can’t use already-done bear picture or sketch. you need to work with the sketch i’ll provide!

I need them today, thanks

I want unique article submitter software just like www.massarticlecontrol.com.

only additional feature that I require here is that I need to send unique versions of articles to the top ten directories automatically. The unique versions should be created like this software….MAR www.article-rewriter.info ( Magic article rewriter)

Remember I do not want exact same to same working, but the final results should be — Able to submit unique articles automatically to top 10-12 directories of the internet like ezinearticles.com, goarticles.com etc. ( If you want the list then I shall submit it to you on request)

IS this possible ?

Goes without saying that the software should be free of any bugs, erros, etc etc.. Should work on all major operating systems without any faults… And all other rewuirements of a professionally made software.

I already have created the article rewriter software. If you are interested in the project, message me and I shall give you the details. Tell me if you can add an extension to my existing software so that it can send unique versions.

I am very serious about this project.

I need 2 logos designed for 2 new iphone apps that are versions of a current app. The logos are cartoons of suitcases for two new versions of my travel app. I currently have a Baby Packing List app, and I now have two new versions of this app for Adults only and for Families. The style should be in similar style as my first app. I’m attaching my original logo, and two samples ideas for the new logos.

Graphics: (PNG format)
1. Two application icons, size: 57 x 57 and 512 x 512 (w * h)
2. Two application loading images, size: 320 x 480 (similar image as #1 but with slogan)
3. six small icons to represent the following list types in my app
(Man, Woman, Boy, Girl, Shopping, and Other) size 40 * 40
4. 3 backgrounds colors similar to stationary paper with borders 320 x 480

Graphics must be original and be provided in PNG format and you will include all PSD and AI layers

I need one 400 word article written for one keyword phrase.

Must follow directions on my Attachment!

Articles must be at least 400 words long. Need to match the number of sentences and paragraphs exactly and match the paragraph spacing. Essentially rewrite each sentence.

Grammar must be Flawless

I will confirm that the article is original

the Key word is Car Body Shop

I will be using your service 3 xs a week if your work is solid.
Happy Bids To you

I have two PSD templates here: http://www.mediafire.com/?sharekey=a3d843dbb4ff4a51aaca48175a79d1c3e04e75f6e8ebb871

I need you to create images based on some products on this website:
http://tinyurl.com/5r6xhf

Template1: There are 5 overlays. We would need you to grab a guy model shot and a girl model shot, replace the current model shot. Make a version for all with each of the overlays. (if there are multiple guy or girl model shots, you can just choose the better of the two).

Template2: There are 4 overlays. We would need you to grab a guy and girl model shot & also the design shot, create 4 versions.

To summarize, for each shirt product we’d need:

template1 – 5 girl versions
template1 – 5 guy versions
template2 – 4 girl versions
template2 – 4 guy versions
template2 – 4 design versions

Please bid for making all shirts, there are ~92 shirts.

You can download the template and test it out if youd like.

Thanks

We need these made for each of of the shirts

I have an existing site that I want to make a word press template out out of. I have all the images and psd versions of the site that I have created. I wish to create a new template while were are making changes. Below is what I am looking to change.

1. Old site is 870 px, new site needs to be 960 px wide.

2. Old Design has banners at the top of page. Needing help to modify a design to remove banner space.. Have Photoshop versions of all images ect.

3. Needing an expert’s graphic experience on the website to add that extra touch. This may include creating a new .psd template from scratch or modifying the ones that I supply.

4. I will be using WordPress so a word press template theme would be needed. After job is completed I want all source files so the template can be modified later. Please do not flatten the layers and please keep everything organized and named so someone can read it later on, see my example .psd files for examples of what I am looking for.

5. Old site has no menu drop down, new site needs menu drop down. Also the old site uses images for buttons, we need to do the same effect for text only.

6. I will be using some static pages that does not need any side bar or widgets, but I will still be using a blog so the blog will need to be modified so that sidebar widgets match the site.

7. I need the final theme, zipped so I can upload to my own site, I would like the progress reports to be on your server, this means that you need to upload changes ect on your server with the theme for review.

8. I have several .psd versions of past designs and I would like to use a bit of each in the design. And any ideas of your own would be a plus!

9. The basic idea of for the design is a “PHP” theme so if you can add in something dealing with php that would great.

10. I have a portfolio page and would like suggestion on how to populate this using word press.

11. I would like final theme to validate using css. No tables please.

12. You need to know how to create wordpress themes, I am not needing a wordpress kiddie on this one. Also you must know graphic design, I want a complex and neat looking design on this.

13. I want full credit for the design, I do not want to see any of this work in your portfolio. I have more work later on if you want portfolio work.

14. I will be using some static pages for some of the pages but the menu system needs to load like this.

Home-> index.php
Portfolio->SubCategory->Posts
Blog->SubCategory->Posts

I hope you get the idea.

I want to be able to create new main categories on the fly. This is the main reason for the design change, since the last design was static. If you notice the logo overlaps the menu, on the past designs.

15. If you are interested in this project, please take the time to download the .psd files and Private Message Board (PMB) me what site I am creating this project for, just so I know you read this. Otherwise all bids will be ignored.

16. There may be some hidden elements into project such as getting the design to look just right, widgets, menus, css ect. If you know wordpress then you already may know what’s needed before I do.

I would perfer if all communication would take place in the PMB as I don’t always have access to my email.

Thanks and happy bidding.

I need to add English and Catalan versions to a Website Tonight site on Godaddy.com.

Also need to do some changes to the site, as most of the 5 original pages need changing.

I have the files available as .ppt for the English site, and translated the text to Catalan.

There is a slight issue, the current Hosting Plan that the site uses “Website Tonight (Economy)” only allows 5 pages. -I would need to ask my client to upgrade? or…

The only other way i believe is to have three versions of a five page site on only five pages is to use CSS and javascript to display the appropriate language version and hide the other two versions on a page depending on whether a user’s clicked on a flag.

This needs to be completed like yesterday, so please only quote me if you REALLY CAN DO THIS and COMPLETE in the next 12-18 hours hours.

I need help with creating a logo (or actually a couple of logos) for a software suite.

The name of the software suite is DigiSport. It is a series of applications used for television broadcasting – mainly but not only sports. I have tried to put together some key words that should influence the design:

- Television
- Football (European – soccer)
- Timing (clocks)
- Graphics
- Speed
- Technology

I need a couple of versions of the logo, for different uses:

- A high-res (vector) colour version (eps or ai files)
- A high-res (vector) black-and-white version for use on white background (eps or ai files)
- A splash-screen version in colour (bitmap 300×300 pixels, tga file with alpha-channel)
- A icon version for files, 16×16, 32×32 and 64×64 pixels (ico file)

For all icon versions a tga file should also be included, with alpha channel. The vector versions should also have a transparent background, making them usable on any background.

The different versions don’t need to have identical design, as long as they are easily recognized. There should never be any doubt that they belong to the same project, but obviously a full-res vector version can have more details than a 16×16 pixels file.

Bids that contains example of previous, similar work, has an advantage. The same applies if you describe your experience with this kind of designs.

Terms for the project:

- Delivery should be made in two steps: first one or more draft(s) showing the basic design idea, and then after approval the final logos.
- All rights (exclusively) to use the logos should belong to me.
- 100% escrow ok if requested

If you cannot accept these terms, please don’t place a bid.

Regards
Jonas

I basically need a good designer able to do animation on an already made header. Remember, you need to be a good designer with animation skills as some details may need to be done from scratch.

I just want different versions of the header, which already has a mascot.

For example:

Christmas version
Halloween version
Summer version
Winter version
etc…

All will be done on a header that I will give to you, but one image for each version. There will be anywhere from 10-20 different versions, but should not be too difficult as you will just need to place objects onto the mascot and surrounding areas.

Payment will be through Paypal ONLY and after the project is complete.

I require good communication through e-mail or instant messaging from the chosen programmer.

I will also need to test the different versions of images on the site when complete.

Hello,

This is more of a development test project so the end result does not have to be an entirely pretty polished interface, but a working example. (very low bandwidth use is important, only for voice on VOIP not music, so keep it as low as possible using lowest codecs)

The goal is to create a P2P VOIP appliction in visual basic, that will also allow IM and file transfers (small pictures). The system should have an address book, and open channels which are essentially like radio channels. as well as the VOIP ability to call an individual.

So the system would work as follows, when started there would be a default ‘Channel’ which is like a big confrence room that each peice of software is set to. So that when you communicate through VOIP on that ‘Radio Channel’ like a CB radio everyone can hear that. There should be the ability to create an unlimited amount of ‘Channels’ with any name required. so for example an event could be given a new channel and it could either be an open channel that anyone can join. or a passworded channel.

When someone joins that channel, any IM message / Broadcast message which is not specific to one person gets sent to everyone on that channel through P2P, as with file transfers. The system should be encrypted.

In addition there should also be the ability to have an address book, so if users were not on a channel, or they wanted to talk to a specific person they could use that VOIP call that would be direct to that person, not in the confrence call.

Another feature would be the ability to ‘listen’ into multiple ‘Confrence’ calls. So in essence there would be multiple radio channels much like a CB and the software can be told to monitor one channel, which might light up on the screen when talking comes up on that one, and have the radio set to monitor and talk on another channel.

One other feature is there would be two versions of the software, one mobile and another a server like desktop version. So the mobile software can all commuincate to eachother even if the server is not there, but the mobile can also communicate with the desktop software which would have more messaging abilities, and more administrative abilities in setting up mobile nodes and the likes.

Another important feature is the ability to updates to the software to be distributed automatically from the desktop version.

In terms of software, the mobile versions would all be on a big LAN, and desktop versions most likely on WAN so some ability to communicate would be important between the two, even if the mobile versions send a register command to the WAN desktop servers to get lists of who is on, radio channels, information and then update that information so that if connection is lost they can still function.

Any questions please use Public Message Board and i can clarify and give diagrams and pictures and the likes.

Keepiong budget to a minimum is important as well as its a trial idea build not a finished project, and i would need copies of all source code and visual basic project files so i could modify that if needed.

You can use existing open source VB solutions if they help achieve the end goal, but basically i want the end application to be all in one, not an application that interfaces to an existing softphone or something, it needs to be in the app.

Any suggestions let me know, Additional information submitted:

06/04/2009 at 7:33 EDT:
One other important feature would be to allow for at least in desktop software logins with different permissions (eg use, settings, supervisor, guest) and that all the desktop consoles have an ability to link up automatically with each other and the mobile software somehow.

In addition a transactions database should be maintained within the software so that logs of messages / files being sent are kept as well as calls being made etc so stats can be provided and logs are kept in a database of some sort.

06/04/2009 at 7:51 EDT:
System needs to be true VOIP P2P, so would be able to function without a server being present. But if a server (being any desktop software) was present, it would detect it and get all channels, settings, information and retain that in case the server disappeared.

Cant rely on the server though, each software node needs to be able to broadcast to discover both LAN and WAN nodes and list those and their status and information in like a buddy (or present nodes) list, not have to enter IP addresses. Kind of like DHT i think.

06/05/2009 at 5:13 EDT:
Could use one of the open source P2P SIP projects possibly provided they can be used in Windows or converted to windows and provide the functionality i need (including NAT traversal)

Listed below are some P2P SIP projects that might be worth having a peek at to use as part of the project.

http://sipdht.sourceforge.net/sipdht2/index.html
P2P SIP using DHT2

http://www1.cs.columbia.edu/~salman/peer/download.html
Open P2P IM / VOIP system

Either way it needs to be meeting the requirements of above, and i guess idiot proof in that it cant require servers, or users to enter IP addresses, should just work.

Whilst it cant require servers, it can download information from desktop systems to get more information about other nodes, both in internal and external networks, but it should keep copies of those tables so if the desktop nodes are not present, it has the ability to find nodes in the private network, or on the WAN.

I guess it is really client-less, all nodes become super-nodes in the DHT sense.

Name of the component: com_socialcontent
Introduction:
I need a wiki-like component that uses the Joomla content structure, plugins and editor.

1) Requirements
- Joomla 1.5
- separate component and or plugin (no hack of com_content please…)
- use of JCE editor previously installed on the site
- MVC
- use the existing content structure
- Jomsocial will be used to manage users. Any links to authors should go to jomsocial profile.
- if possible, use AJAX to make the component look and behave better in the front end

2) Database
- new table: #__social_content_version to store previous versions of articles
id, content_id, title, content, comment, author_id, date_created(date 0000-00-00 00-00-00), date_archived(date 0000-00-00 00-00-00), flagged(int)
- new table: #__social_content_sectionid to store allowed sections and categories

3) Front end access and limits
- Articles can be edited and created only in sections and categories specified by an administrator in the backend configuration tab of the component.
- Any registered user can create an article in those categories
- Any registered user can edit an article
- Any registered user can display a list of all versions for a particular article, display the article and select that previous version to become the new one
- If multiple users are editing the same article, the last one to save will have the current article, the other updates will be saved as versions. If multiple edits are happening at the same time, an alert should be displayed on the editor’s screen. No checkin/checkout.

4) Back end
- current articles will be managed as usual using Joomla’s article manager
- the component should allow us to view all the versions for all the articles, click on one to edit or unpublish (if unpublished, that version will not be visible in the front end) and make it the current article. The current article should then be saved as a version.
- a configuration to select allowed sections and categories

5) Front end Article creation
- should display allowed section, then AJAX allowed categories
- title
- content using JCE editor
- comment field allowing the author to comment
- author id (hidden)
- date (hidden)
- token (hidden)

6) Front end Article edition
- same form as above
- when saved, a copy of the current article will be saved in the version table then the changes will modify the article
- no checkin/checkout

7) Plugin displaying a list of the last 10 authors and link to versions
- A list of profile pictures linked to profiles (with names appearing when mouseover picture) will be displayed at the bottom of each article in the allowed sections.
- A link will take the user to a list of previous versions, let the user display any version in a different window, and select a version to become the current article (this will first save the article as a version)
- A link to flag that article. It will send an alert to administrator by email and add a flag in the database.

Go to www.dzsocial.com for an example of what I want. username demo, pwd demo123 if you click on “skydivepedia” you will have some categories and an example of a page
http://www.dzsocial.com/Skydiving-Gear/Gear/packing/packing-techniques_c97_m123.html . This site is not exactly what I want and full of hacks. Too messy. This is why I need a clean component instead.

I want stuff for flash with resell rights:

I have few loaders but they dont work at:
marketplace.layoutcookbook.com

If you can etract stuff from my flash website

1. Loaders different styles(5) – Should be easy and drag/drop functionality and should work with flash cs4 and old versions.

2. 2 Contact Forms(2) – Should be easy and drag/drop functionality and should work with flash cs4 and old versions. PHP and asp one each

3. Text Scrollers (2) – Should be easy and drag/drop functionality and should work with flash cs4 and old versions.

4. Music Playerss (2) – Should be easy and drag/drop functionality and should work with flash cs4 and old versions.

I have a jpeg of a monogram logo. I need some color changes made.
Must be done within the hour.

I need to have someone with experience in using the Jetspinner tool to spin my health related article into 150 unique versions.

If you are familiar with Jetspinner you know that you won’t be writing 150 unique articles, but you’ll be using the Jetspinner tool to spin my article into 150 unique versions.

I’ll also want my author resource box spinned.

I will supply you with the original article to use in Jetspinner.

You can also use another article spinner tool if you would like as long as the tool produces a min of 150 new unique versions.

I need two versions of logos. Same design, just different colors.

One needs to be blue and green to match the banners on http://www.cdpts.com/bibi

and the other needs to be a silver shiny and black, kind of like http://www.noamdesign.com/Web-Design-Overview

I like how this website is 3d, and wouldn’t mind that if it doesn’t cost too much more: http://widenetconsulting.com/

I HAVE A LIMITED BUDGET, BUT STILL WANT TO PAY YOU WHAT IT IS WORTH..

MUST SHOW MOCK-UPS OR WILL NOT BE CONSIDERED

We’re going to be building an application in FLASH taking only a little over 1000 Q&A from a book (Word) and converting them (copy and paste) to a dynamic flash type of flash application for both web (FLEX) and cd-rom (AIR). Basically almost all the questions are multiple choice, but there are many versions of these MC questions & answers, so be sure to see and study the attachment so that the db template will, in fact, accomodate these various versions of multiple choice and/or matching.

We’re contemplating the following setup:

***FLASH UI (FLEX / AIR)
***MIDDLEWARE: php
***DB: mySQL (online / FLEX version) and SQLite (CD / AIR version)

***AIR goes with SQLite as you know
***FLEX goes with mySQL

Your bid is for the DB part only (ie not the UI or the middleware) for BOTH mySQL and SQLite versions.

We’ll need you to create a DATABASE TEMPLATE that can meet all of the following 10 …

DATABASE REQUIREMENTS / CONSIDERATIONS:

1. We need to be able to copy and paste the various Q/A components (for the columns of data, see p.1 of attached document) from the original Word (or pdf) directly to the table (but remember too that we’ve got SYMBOLS and TABLES (see attached document for what we mean by symbols and TABLES). There’s a lot of SYMBOLS (for example arrows, etc, ie not flash symbols per se), and even TABLES (eg showing different sequences of symbols and one sequence is the correct answer) throughout the book
2. DB should allow for a column for images, for questions that also have an image or images.
3. When we copy and paste the various parts of each question and answer into your template, we want the symbols AND the FORMATTING to be preserved. The symbols are mostly from fonts like monotype sorts, zapfdingbats, webdings, wingdings, etc. We can identify all the fonts for you so that when they paste, the symbols don’t get lost in translation.
4. db MUST work for both Web & CD
5. MUST work with both Windows & Mac OS
6. for a dynamic application
7. Both web and CD db should be secure and encryptable .
8. I understand any type of db can work with Flash (generally) thru middleware like php, asp, cf, etc. Is it true that the final step is that Flash can ONLY read XML?
9. Ideally we’d like to be able to update questions and answers for the application without having to bother the coder every time, so would this change your recommendation as far as a db that can meet these criteria?
10. MUST be compatible with FLEX and AIR for later development of the FLASH UI.

ATTACHED please find a 10 page pdf SAMPLE of question types from the original word file from which we’ll be pasting appropriate portions of the Q/A to the proper columns. Just use the pzwd “flashdb” (no quotes) to view the ATTACHED document.

Your bid is for the DB part only (ie not the UI or the middleware) for BOTH mySQL and SQLite versions.

Along with your bid, remember to INCLUDE 3 things:

a. What do you feel would be the best middleware (between the FLEX & mySQL ….and between the AIR & SQLite, and why? For example, if you feel strongly that asp.NET is superior for this type of flow, please let us know your preferred middleware and why you prefer it over, say, php.
b. Because of auto mat ed bids, please include the word “genuine” in your bid. It will also show that you cared enough to read through the entire job description.
c. What experience do you have involving FLEX, AIR, with databases of mySQL / SQLite ?

Delivery is expected within 7 days of project award (10 days if you also plan to include a MACRO to automatically parse the data from Word into the columns (which macro will pay an extra $100).

If your work is excellent, you’re easy to work with, you’re reliable and can check in daily with your progress, we will gladly consider awarding you the other portions of this project on completion and have many more projects for you.

Thank you.

Parson

SEE ATTACHEMENT

Background

For this assignment, you complete a program to play the game of “Twenty-one” (also called “Blackjack”).

The general idea of Twenty-one is as follows. There are two players, the customer and the dealer. The dealer deals a card face down to the customer, then a card face up to herself (the up-card), then another card to the customer and another card to herself, both face down. In most cases, the customer may then ask for more cards, one at a time. The dealer does the same, and the hand is resolved. The object of the game is to be dealt a set of cards whose total value is as close to 21 as possible without going over.

Cards are dealt from a deck of 52. There are four cards in the deck with value 2, four with value 3, and so on up to value 9; there are sixteen cards with value 10 (four 10′s and twelve face cards: four jacks, four queens, and four kings); and there are four cards (“aces”) whose value may be either 1 or 11 depending on the value of a player’s remaining cards. For both players, an ace counts 11 unless the hand total is more than 21, in which case it counts 1.

For our purposes, the actual play of the game proceeds as follows. Each player receives two cards as described above. If the dealer’s cards total 21