I am looking for someone to manually post to Craigslist morning noon and night. It is for a auto dealership.
Piece of cake job
It was a script working by URL ns.domain.com:8080 and plesk stops to work.
Then i ask support from webfarm to fix it and they did but as plesk was good this script stops
Its just create whats necessary to make this already installed script work again.
It has to be a good linux knowledge and start right now.
Please dont bid out of budget to dont waste your and mine time.
Many TNKS.
My last project went bad programmer has distroyed site and has already made it clear is planning to do more. He has said even if passwords changed he can still access my drupal site. I need someone to secure website from malicious attacks.
I need a programmer to write a simple word macro that will highlight stop words (all the words listed in the attached spreadsheet) as I am typing an article. So if I type a sentence such as: This dog is not a labrador, he is a german shephard. As I am typing, I would like the stop words to show up highlighted (words like I, the, is, etc.). Attached is the list of stop words in excel format.
Trading rules…
1) Open buy trade when custom indicator will show buy arrow. ( buy order at current market price after completion of 15 min arrow candle).
2) Open sell trade when custom indicators will show sell arrow. ( sell order at current market price after completion of 15 min red candle).
the period of indicators: Default
Note: If two or more buy or sell signal will come continuously then trade on every signal with their separate profit target and stop loss.
3) Profit Traget: Close buy/sell at 5 pip profit target on 15 min timeframe.
Stop Loss: 15 pip
4) EA inputs: Lot size, Maximum Lots, Profit Target, Stop Loss, Slippage, maximum spread, Magic Number
EA inputs should be able to change manually.
5) EA must display following information in the top-left corner of the chart: lot size, funds, spread
6) Spread: Maximum 3 pip
7) Timeframe: 15 min, 5 min, 1 min
Lot size: starting lot size 0.01 (should be able to change manually according to fund)
9) Maximum Lot Size: 500 standard lots
11) Currency Pair: EURUSD
12) Minimum Fund: $ 6
13) EA should be able to backtest
14) EA should be able to work with ECN 5 decimal broker.
I will use this EA on Hotforex micro account.
15) Stop Loss: If the trade will not reach at target profit and go in loss then close that trade with these two conditions (whichever will be earlier)
if the indicator will show reverse signal then immediate close the trade
or
Stop Loss : 15 pip
16) Money Management: if mm will set “True” then increase lot size 0.01 per $ 15 and if i will set “False” then i will choose manually.
The indicator in both mq4 and ex4 format and the snapshot of indicator in attachment.
A grid EA , with 1 indicator .
1. Speed/ Tick Indicator. ( True/ False )
Activates the Pending order, when EA detects Speed/ Tick data or senses volatility.
2. Ea places Sell Stop & Buy Stop ” x” pips apart.
3. When one of the order is triggered, EA moves the other pending stop Order as follows.
a. Example: EUR/USD Buy Order is trigerred at 1.4200 , Sell Stop is at 1.4170
Price moves to 1.4199 , sell stop Modified to 1.4171 …. Each loss pip triggers closing up of Sell stop by 1 pip.
However if price moves to 1.2003.. Sell pending stop is triggered by 1 pip an is placed at 1.4171 .
In brief, loss of a trade by each pip modified sell stop by 1 pip, and gain trade modified sell stops only by 1 pip
for every 3 pips.
4. timer function .
Hence these are the external parameters required.
1. Sell Pending Order = True/ False
2. Buy Pending Order = True/ False
3. Trade time start = 0
4. Trade time Stop = 24
5. Trade Comment =
6. Stop Order distance =
7. Modify Opp.Order When pips moves to loss by =
8. Modify Opp.Order when pips moves to profit by =
9. Use Speed Indicator function = True/False
Another important criteria would be to modify the orders internally without placing modifications to brokers inorder
to avoid excessive trades modifications , thereby avoiding any Broker ban.
I have a few Speed / Tick Indicators, which I can send by Pm . Please throw any doubts you may have.
Programmers with Skype preferred .
Thanks
A grid EA , with 1 indicator .
1. Speed/ Tick Indicator. ( True/ False )
Activates the Pending order, when EA detects Speed/ Tick data or senses volatility.
2. Ea places Sell Stop & Buy Stop ” x” pips apart.
3. When one of the order is triggered, EA moves the other pending stop Order as follows.
a. Example: EUR/USD Buy Order is trigerred at 1.4200 , Sell Stop is at 1.4170
Price moves to 1.4199 , sell stop Modified to 1.4171 …. Each loss pip triggers closing up of Sell stop by 1 pip.
However if price moves to 1.2003.. Sell pending stop is triggered by 1 pip an is placed at 1.4171 .
In brief, loss of a trade by each pip modified sell stop by 1 pip, and gain trade modified sell stops only by 1 pip
for every 3 pips.
4. timer function .
Hence these are the external parameters required.
1. Sell Pending Order = True/ False
2. Buy Pending Order = True/ False
3. Trade time start = 0
4. Trade time Stop = 24
5. Trade Comment =
6. Stop Order distance =
7. Modify Opp.Order When pips moves to loss by =
8. Modify Opp.Order when pips moves to profit by =
9. Use Speed Indicator function = True/False
Another important criteria would be to modify the orders internally without placing modifications to brokers inorder
to avoid excessive trades modifications , thereby avoiding any Broker ban.
I have a few Speed / Tick Indicators, which I can send by Pm . Please throw any doubts you may have.
Programmers with Skype preferred .
Thanks
Single MT4 indicator that provides each entry signal with a stop loss and simple instructions will be provided.
Basic EA requirements: start and stop trading hours and trailing stop.
I am looking for the services of an experienced metatrader4 programer who has also some forex trading experience themselves.
He/she must understand how a typical Forex Broker works when accepting customer orders, taking into account things like slippage, gapping, minimum pips when placing trades with the softare.
FYI, I am basically a Forex trader who prefers to SCALPE in and out of trades on the 5 min and 15min charts.
I wish to create a faster and easier method of placing Long / Short orders with automatic lot sizing by having movable and different colored horizontal lines highliting the entry level, stop-loss and profit taking levels directly on the trading screen instead of having to manually key in these values in a separate window screen.
Everything piece of data should be shown on the top LHS of the trading screen and must be editable without having to go into the properties of the script or EA.
For example, the colored lines may be visually represented as follows :
1) Horizontal Green line for the Entry level ( Long / Short )
2) Horizontal Red line for the Stop-Loss level
3) Horizontal Blue line for the 1st Profit Target level
4) Horizontal Purple line for the 2nd Profit Target Level
These lines will be freely adjustable and must have a confirmation “Tick” or “Button” to lock in the exact values on screen.
The lot size traded will be automatically calculated based on 2%( but Adjustable ) of total account equity after the Entry and Stop Loss Levels are locked in.
The 1st Profit target level will be automatically set to 1:1 risk to reward ratio ( but Adjustable ) but can be visually adjusted if required.
When this level is hit, the Stop-Loss level is moved to break even level plus spread.
The 2nd Profit target level will be automatically set to 1:2 risk to reward ratio ( but Adjustable ) but can be visually adjusted if required.
When this level is hit, the Stop-Loss level is moved to the 1st Profit target level.
I will have full rights to this script / EA and it cannot be used for any other purpose including as an example for future clients.
Again, only experienced meta trader programers need apply.
Many thanks in advance.
I have this sonicBB that i really like. Its out of date and gets hacked frequently
I need the forum installed fresh ( have files)
on 2 domains
and then, security updated to stop injections, and bot postings
I have a previous DB of posts that also will need installed to restore the forum
Thanks
I need help for a EA code on MT4.
Below is the details:
1. MT4 should not execute any deal if there is any missing bar in the past data set, EA should check it against any probability of a problem to be lived in the DSL connection.
2. EA will work on more than 30 pairs simultaneously
3. It shold never add to a position if there is already an open position in a pair.
4. EA should a have portfolio risk constraint that it should have more than
Assuming that bid price is processed by the EA
5. long order at the bar T+1
Enter price: Minimum of (the Close Price of the bar T and the Typical Price (HLC/3) of the bar T) + typical spread for the relevant currency
Initial Stop Loss Price: (Lowest Low of the T,T-1 and T-2) – 1 tick
Condition:
a. if Close of the bar T > Highest Close of last 13 bars before the bar T (from T-1 to including T-13)
b. Ratio of: (Initial Stop Loss Price) / Enter Price >= 0.9970
c. Ratio of: ([Highest High of the T,T-1 and T-2] + spread + 1 tick) / Enter Price <= 1.0045
d. Ratio of: (Close of the bar T)/Enter Price >= 0.9970
Initial Target Price to halfen the position: enter price * 1.0045
Second Target Price to close the deal all: enter price * 1.0090
Trailing Stop: maximum of the following
a. High price of the actual bar (say it bar Z) * 0.9955
b. Close price of the bar (Z-1) * 0.9970
c. (Lowest Low of the Z-1, Z-2 and Z-3) – 1 tick
In case that 7 bars have passed after the signal bar and the trailing stop did not become bigger than the enter price price still then EA should close the position immediately.
6. short order at the bar T+1
Enter price: Maximum of (the Close Price of the bar T and the Typical Price (HLC/3) of the bar T)
Initial Stop Loss Price: (Highest High of the T,T-1 and T-2) + typical spread for the relevant currency + 1 tick
Condition:
a. if Close of the bar T < Lowest Close of last 13 bars before the bar T (from T-1 to including T-13)
b. Ratio of: (Initial Stop Loss Price) / Enter Price <= 1.0030
c. Ratio of: ([Lowest Low of the T,T-1 and T-2] – 1 tick spread) / Enter Price >= 0.9955
d. Ratio of: (Close of the bar T)/Enter Price <= 1.0030
Initial Target Price to halfen the position: enter price * 0.9955
Second Target Price to close the deal all: enter price * 0.9910
Trailing Stop: minimum of the following
a. Low price of the actual bar (say it bar Z) * 1.0045
b. Close price of the bar (Z-1) * 1.0030
c. (Highest High of the Z-1, Z-2 and Z-3) + spread + 1 tick
In case that 7 bars have passed after the signal bar and the trailing stop did not become lower than the enter price price still then EA should close the position immediately.
Amfphp stop working after I update php version. I cannot do remote posting to my wp.
I need help for a EA code on MT4.
Below is the details:
1. MT4 should not execute any deal if there is any missing bar in the past data set, EA should check it against any probability of a problem to be lived in the DSL connection.
2. EA will work on more than 30 pairs simultaneously
3. It shold never add to a position if there is already an open position in a pair.
4. EA should a have portfolio risk constraint that it should have more than
Assuming that bid price is processed by the EA
5. long order at the bar T+1
Enter price: Minimum of (the Close Price of the bar T and the Typical Price (HLC/3) of the bar T) + typical spread for the relevant currency
Initial Stop Loss Price: (Lowest Low of the T,T-1 and T-2) – 1 tick
Condition:
a. if Close of the bar T > Highest Close of last 13 bars before the bar T (from T-1 to including T-13)
b. Ratio of: (Initial Stop Loss Price) / Enter Price >= 0.9970
c. Ratio of: ([Highest High of the T,T-1 and T-2] + spread + 1 tick) / Enter Price <= 1.0045
d. Ratio of: (Close of the bar T)/Enter Price >= 0.9970
Initial Target Price to halfen the position: enter price * 1.0045
Second Target Price to close the deal all: enter price * 1.0090
Trailing Stop: maximum of the following
a. High price of the actual bar (say it bar Z) * 0.9955
b. Close price of the bar (Z-1) * 0.9970
c. (Lowest Low of the Z-1, Z-2 and Z-3) – 1 tick
In case that 7 bars have passed after the signal bar and the trailing stop did not become bigger than the enter price price still then EA should close the position immediately.
6. short order at the bar T+1
Enter price: Maximum of (the Close Price of the bar T and the Typical Price (HLC/3) of the bar T)
Initial Stop Loss Price: (Highest High of the T,T-1 and T-2) + typical spread for the relevant currency + 1 tick
Condition:
a. if Close of the bar T < Lowest Close of last 13 bars before the bar T (from T-1 to including T-13)
b. Ratio of: (Initial Stop Loss Price) / Enter Price <= 1.0030
c. Ratio of: ([Lowest Low of the T,T-1 and T-2] – 1 tick spread) / Enter Price >= 0.9955
d. Ratio of: (Close of the bar T)/Enter Price <= 1.0030
Initial Target Price to halfen the position: enter price * 0.9955
Second Target Price to close the deal all: enter price * 0.9910
Trailing Stop: minimum of the following
a. Low price of the actual bar (say it bar Z) * 1.0045
b. Close price of the bar (Z-1) * 1.0030
c. (Highest High of the Z-1, Z-2 and Z-3) + spread + 1 tick
In case that 7 bars have passed after the signal bar and the trailing stop did not become lower than the enter price price still then EA should close the position immediately.
Hello Programmers.
Quick job for you guys.
What I need done is a quick jQuery draggable menu that stays within the upper and lower boundaries of a div also with limits on how far it can be dragged.
I will try to visually explain this…excuse my ASCII art if it doesn’t come out good…
Ex.
———————————
Menu A Menu B Menu C Menu D Menu E Menu F
———————————
The whole menu within the upper and lower boundaries is draggable.
When the first menu item ‘Menu A’ hits the its corner, the drag should stop.
When the first menu item ‘Menu F’ hits the its corner, the drag should stop.
Everything not within the boundary should be hidden via “overflow:hidden”
The drag effect should have an easing effect and not stop abruptly if no corner is reached.
I am almost sure there are jQuery plugins that do this…and if so, please use the plugin and create a menu similar to the above.
Budget: $30
We have a eSyndiCat directory and we are receiving spam link requests through the submission form that has a captcha. We believe they know how to bypass the captcha and/or know the algorithm to the captcha.
I would like someone to help so that I do not receive these spam submissions. This could mean modifying the current form. We will need documentation on any changes made to the form.
Please reply with the term “I understand the requirements for this eSyndiCat project” to prove you read this project for consideration.
I currently have an EA running which generates pending orders. I would like to prevent the EA from generating new pending orders while there is an active open order in the market. I would also like to be able to set a trade start and stop time within the EA which would stop the EA generating new pending orders outside of the start / stop times but continue to manage any orders already in the market.
I need an EA created for me that issues a buy/sell signal based off the values of two indicators from multiple currency pairs. I need the option of having it only work between certain times of the day, which should be variable and input by me. Also, I would like another 2 sets of variables for start and stop times to prevent it from running during news times input by me (sometimes, I will not need these so I need the option of them being null). This EA needs to analyze data on different currencies at the same time. This will be run on a live account, so I need the buy and sell signals, along with stop/loss and exit signals. The buy/sell signals should be issued when the cumulative indicator values reach a certain amount and price reaches a certain price point determined by previous price action. Stop loss will determined by price crossing back down through a moving average, but I’d like the option of a hard stop loss in case the original value is too far away. Also, an exit signal should be issued in case the EA is still in a trade at the end of the selected trading time range (holds on to trade until price crosses stop loss point) or at the close of trade on a Friday. This should not be too difficult to create, but I need someone with experience. I will provide all system details privately.
Thank you and happy bidding!
The trading technique starts as follow: EA sells at random.
STEP 1: (A) sell 1/1000 of equity size with instant execution with a stop loss of 75 pips and a take profit of 45 pips
(B) simultaneouslty place a stop buy 25 point above original entry point wiht a size of 2/1000 of equity with stop loss of 75 pips and take profit of 45 pips
IF market moves up and the stop buy is executed a stop sell (C) with size of 3/1000 will be trigerred with same entry, SL and TP number of the main trade in STEP 1(A).
If the market continues to move up and reaches the limits set in Step 1(B) the stop sell in (C) will be removed and the EA will start again in from (A).
If the market falls back down and activates the stop sell in C a new stop buy with size 8/1000 will be placed with same entry, Sl and TP levels in (B)
The EA will continue stacking the trades until the market moves in direction or another and reaches the take profit and stop losses. in that case all pending orders will be cancelled and the EA will start again from the begining
NB. size of trades increases in a fashion that the pending order with existing orders will be twice as big as the open interest. i.e in trade (a) sell 0.1 the stop buy will be 0.2, the following stop sell needs to make the sell position the double of 0.2 hence the size must be 0.3 (0.1+0.3)=0.4 on the sell side
I am attaching an excel sheet with numbers and colors to better explain the idea
EA should start at random by selling (size 0.1) at market price:
1- sell 0.1 market price with SL 75 pips away and TP 45 pips away
2- simultaneously place STOP BUY 25 pips above original entry price with 75 pips SL and 45 pips TP. (size must be twice as big as all open position i.e. in this case 0.1 sell must be met by 0.2 buy)
this is where conditions start
A- if market moves down and hits TP the STOP BUY must be cancelled and EA start over by selling again at market price where it closed the original sell
B- is market moves up and triggers the STOP BUY two conditions scenarios could take place. Once STOP BUY is triggered, the EA must place a STOP SELL that makes the size of selling entries twice as big as the buy entries in that case 0.2 buy must be met with 0.4 sell, 0.1 already placed in original trade and 0.3 pending STOP SELL)
Here are the scenarios:
Scenario B1- market triggers STOP BUY (0.2) and moves up to reach the set TP it cancels the pending STOP SELL (0.3) and starts all over from step 1 by selling 0.1 with SL 75 pips and TP 45 pips and a simultaneous STOP BUY 25 pips away and above entry price.
Scenario B2- is market trigger STOP BUY (0.2) but never reaches the TP level but instead turns back down and triggers the STOP SELL (0.3) a simultaneous STOP BUY with same entry, SL and TP as the first STOP BUY (0.2) is placed however the size is different. at this point we have (sell 0.1+0.3 =0.4 and buy: 0.2 to double the size of open sells we need 0.8 buys hence the size of the pending STOP BUY must be 0.6) fs the market continues down and reaches the TP of the sell trades it cancels any pending conditional orders and starts over from the begining by selling (0.1) at market order. if market never reaches the TP and goes back up and tiggers the STOP BUY (0.6) a STOP SELL with size of 1.2 and identical entry, sl and tp os the very trade is put in place and so on…
The variable should be the size of the very first trade, the hedge limits, the take profit and the stop loss.
I am attaching an excel sheet to explain the conditions and show the possible cash flow in pips
EA should start at random by selling (size 0.1) at market price:
1- sell 0.1 market price with SL 75 pips away and TP 45 pips away
2- simultaneously place STOP BUY 25 pips above original entry price with 75 pips SL and 45 pips TP. (size must be twice as big as all open position i.e. in this case 0.1 sell must be met by 0.2 buy)
this is where conditions start
A- if market moves down and hits TP the STOP BUY must be cancelled and EA start over by selling again at market price where it closed the original sell
B- is market moves up and triggers the STOP BUY two conditions scenarios could take place. Once STOP BUY is triggered, the EA must place a STOP SELL that makes the size of selling entries twice as big as the buy entries in that case 0.2 buy must be met with 0.4 sell, 0.1 already placed in original trade and 0.3 pending STOP SELL)
Here are the scenarios:
Scenario B1- market triggers STOP BUY (0.2) and moves up to reach the set TP it cancels the pending STOP SELL (0.3) and starts all over from step 1 by selling 0.1 with SL 75 pips and TP 45 pips and a simultaneous STOP BUY 25 pips away and above entry price.
Scenario B2- is market trigger STOP BUY (0.2) but never reaches the TP level but instead turns back down and triggers the STOP SELL (0.3) a simultaneous STOP BUY with same entry, SL and TP as the first STOP BUY (0.2) is placed however the size is different. at this point we have (sell 0.1+0.3 =0.4 and buy: 0.2 to double the size of open sells we need 0.8 buys hence the size of the pending STOP BUY must be 0.6) fs the market continues down and reaches the TP of the sell trades it cancels any pending conditional orders and starts over from the begining by selling (0.1) at market order. if market never reaches the TP and goes back up and tiggers the STOP BUY (0.6) a STOP SELL with size of 1.2 and identical entry, sl and tp os the very trade is put in place and so on…
The variable should be the size of the very first trade, the hedge limits, the take profit and the stop loss.
I am attaching an excel sheet to explain the conditions and show the possible cash flow in pips.
Hello,
I am running Adult Video Script and we are uploading large images.
The problem is when the user views the image they are seeing a condensed version of it. The script is maxing the size of display. I want the image to display in its full size.
Quick job for some one.
I am looking for a marketer to genereate 30 leads per day.
Stop Foreclosure
Foreclosure Defense
Foreclosure Litigation
The Lawyers Referral Network www.Lawyers.TL (Trusted Lawyers)
Need immediate leads.
Hi, I would like 4 short articles written about snoring. Snoring is a big problem for a lot of people and it can cause both sleeping and relationship problems. I would like 2 informative articles, 1 helpful article, and 1 review of a product written as described below:
1) (Around 300 words) An overview talking about snoring and the problems associated with it. In this article, I don’t really want to talk about a solution to snoring, but mainly just talk about the causes, problems, how it happens, etc.
Please mention the keyword “curing snoring” at least twice in this article, but no more than twice.
Please also use these other keywords, “causes of snoring”, “help for snoring”, “snore aid” “treatment for snoring”, “stop snoring”, “snore guard”, and “preventing snoring”. You will have to get creative to use these keywords in a way that is more informative instead of giving a solution in this article.
2) (Around 200 – 300 words) Another simple article telling about more facts about snoring…maybe more facts like how many people suffer from snoring, and other facts about snoring. Maybe you can talk about the different kinds of treatments/products people use to stop snoring.
Please include these keywords in the article, and again, don’t write it as if there is a solution, just give facts on these…..”chin strap for snoring”, “anti snoring pillows”, “surgery for snoring”, “snoring mouth guard”, “snore aids”, “snoring spray” and “snoring products”.
3) (450-500 words) In this article, I would like a review of the product found at this site…https://mysnoringsolutions.com. Don’t write the article from the perspective that I personally tried it, but more that I have reviewed many other products, and this one appears to be the best one I have found. Point out all the good points of the product, how it works, the benefits, etc….but also say one negative thing about the product so it seems more natural.
Please use the keyword, “curing snoring” about 2 or 3 times in the article, and also sprinkle these keywords throughout the article: “my snoring solution”, “sleep apnea cure”, “sleep apnea snoring”, “stop snoring exercises”, “treatment for snoring”, “sleep snoring”, “snoring and sleep apnea”, “help for snoring” and “stop snoring”.
4) (About 250-300 words) Helpful article. I would like a nice article that gives someone helpful information about snoring. Don’t tell them another cure or solution, because that is the purpose of the review, just a useful article with good, quality information.
Please use the keyword “curing snoring” only once in this article. Also use the keywords “home remedies for snoring”, “snoring stopper”, and “treatment of snoring”.
Also, you can title the articles as you like, but please put the corresponding number next to the title as shown above. For example, for the article that has to do with #1, please put that number in the title for easy reference.
I have budgeted $30 for this project.
Thank you,
Jason
I would like to have an EA programmed to run on a Metatrader 4 platform.
Simple strategy, trade long on break of previous “Up Fractal” by x points (adjustable), trade short on break of previous “Down Fractal” by y points (adjustable). Trades filtered by gradient of Simple Moving Average (all inputs adjustable). SMA higher than close of previos bar, allow long trades only. SMA lower than close of previous bar allow short trades only. All orders are to be placed as pending orders.
Once a trade is opened, immediately place stop loss (adjustable).
Run a trailing stop loss (adjustable). Trailing Stop Loss to be run on the platform, not within the EA.
All indicators are standard MT4 indicators.
I will provide my default settings to the successful programmer for testing purposes.
I need a professional to write a trading script that will function with a Meta trader trading platform.
Requirements:
1.) Script must function with fxcm forex metatrader4
2.) Script must execute timed orders
3.) Script must set profit take and stop loss based on specific pips
Purpose:
The script must be able to execute a buy or sell at a specific price but the trade must not execute before 2:00 am. This trade will have set pip take profit and stop loss. For example I look at forex charts say at 6:00 pm and know the entry price at which I want to place a buy and an opposing sell for a currency pair but I do not want the trades to execute until the London session (2:00 am the following day.) Since these are pending orders you should be familiar with buy limit/sell limit versus buy stop/sell stop.
I’m looking for help in programming an EA in MQL4. The EA called MTF, as of now, has been in development for well over 2 1/2 years. The system works extremely well. The problem that I’ve had is trying to find a reliable, competent programmer who really knows what they are doing!!! Must also have strong math skills and sign an NDA.
The EA should require around 40 – 60 hrs to complete. Once the EA is proven, Greenberg Traurig will patent the EA at Phase 1 and 2, then it will be marketed with a “small twist”. The marketing “small twist” will be discussed with the chosen programmer which will be part 2, a new commercial EA. Step 1 first.
The following is a short partial description of the MTF EA.
The EA is heavily rule-based and works with any currency pair, 24 hrs a day, independent of current affairs. It is best not to run the EA 24 hrs before a major holiday of that currency pair. No problem running Friday’s, except do not open a new trade after noon of the New York session and it is better to wait for the London session to open on Monday, to start trading again. The first of the week opening sessions of the Australian and the Tokyo market on Monday, usually does not move very much, short cycles. MTF looks for trends, it is not a scalping system. MTF is designed for day trading and long term. Therefore, it is designed to work on the M30 and higher time frames. The most stable and profitable time frames. The faster time frames are used to help verify that a trend is developing. Scalping is too risky!!! As the trading account develops, then the W1 and MN time frames will be traded.
Custom channel indicators for each time frame are used to determined if the developing trend is new or a late rebound. Support and Resistance (S/R) is used to set the Stop Loss, or the Channel Indicator. Stop Loss is not set at a predetermined setting for each time frame. As an example, lets say 40 – 60 pips for the M30 time frame which is the average Stop Loss setting for most of the EA’s on the market. Using S/R or the Channel Indicator, the Stop Loss setting can be as low as 10 pips. This minimizes the loss if the trade turns compared to other systems. The slower the time frame the higher the Stop Loss setting.
Take Profit is taken also from the Channel Indicator, usually securing more pips by exiting the trade in a more timely manner. Trends follow channels. Very few EA’s use a channel indicator. Most channel indicators simply are very poor. Of the hundreds of channel indicators that are on the market, I got lucky and found one that partially worked. After studying this channel indicator I realized it needed a few modifications and needed to be adjusted for each time frame. This little bit of programming I was able to do.
There are 4 custom indicators to help the program stay in a trade without a premature exit, due to a very small trend reversal. One or all 4 of these custom indicators need to be merged with another indicator, for improved trend confirmation and to help filter out the noise of a small trend reversal. The problem is the number of buffers available with MQL4. 8 is the maximum number of buffers that MQL4 allows. With just simple merging of 2 indicators, this number is exceeded. This is where some great programming skills are required.
Phase 2, I want to market an EA that works, not scam the general consumer. 99% of the EA’s on the market just don’t work. Those that do, seemed to be designed for a few specific currency pairs and are only marginally profitable for a short time before major updates are needed or stop being profitable at all. MTF does not have that problem.
This is just a brief outline of the EA. There are many more custom and modified indicators used in determining a trade entry or exit.
I hope this helps some.
Once the NDA is signed, all details will be presented.
If this is of interest to you, please contact me by email.
Sincerely,
Mark Perkins
Our server is getting major DDoS or SYN flood attacks. We are looking for an experienced system admin that can help us stop this.
Ninjascript Skeleton Strategy (Ninja script for Ninja Trader)
(The information below is attached as a word document also)
The Basic System:
The task is to develop, tweak and fine tune a bare-bone strategy, to which I can add various indicators later, and backtest and forward test. I already started coding some of what I want, and I can email it to whoever gets the project.
The basic idea is to enter long or short based on some very simple entry conditions, with a fixed initial stop loss (for example, buy 100 shares of AAPL at market based on some trigger conditions). Once I bought 100 shares, I want to divide this 100 into 3 different blocks of shares (say 50, 25 and 25 shares
Stacking: 1. 10 pips above price a buy stop with a TP of 10 2. 10 pips below price a sell stop with a TP of 10 3. 15 pips above the first position a buy stop with a TP of 15 4. 15 pips below the second position a sell stop with a TP of 15 5. 20 pips above the third position a buy stop with a TP of 20 6. 20 pips below the fourth position a sell stop with a TP of 20 7. 25 pips above the fifth position a buy stop with a TP of 25 8. 25 pips below the sixth position a sell stop with a TP of 25 9. 30 pips above the seventh position a buy stop with a TP of 30 10. 30 pips below the eighth position a sell stop with a TP of 30
Create landing pages for an anti-spam site targeted towards small-medium business.
one landing page for each of the following keywords:
stop spam
stop e-mail spam
stop losing legitimate e-mail
better anti-spam
barracuda
postini
exchange
black berry
android spam
Hello, I was wondering if you could make a script that can stack the following order sequence that would work on MT4 platform:
1st pending position: place a pending order buy stop/sell stop with a 20 pip TP no SL
2nd pending position: 10 pips above/below the first pending position with a 20 pip TP no SL
3rd pending position: 15 pips above/below the second pending positions with a 20 pip TP no SL
4th pending position: 10 pips above/below the third pending position with a 20 pip TP no SL
with the option to change if its a buy stop or sell stop.
Also I would like to have the option to add more positions, like the 5th, 6th, 7th etc and it would have to follow the same sequence from the 4th position, do you think that is possible?
Attached is a link to explain:
http://screencast.com/t/ZGE0YTNjNTQt
Best Regards,
Rudolph
We need someone who can help us stop a hacker from sql injecting our MSSQL database.
I need errors fixed in my coding my host is saying. please bid if you have experience in field and can fix all errors im running into. maby a diagnostics can be ran so all errors are resolved in code….i do not want anyone that wants to get payed before errors are fixed. i had a programmer who said can do it and after he got in said everything looks fine. after errors resolved i will gladly pay… below is wut host said and under are 2 main error messages i am receiving on 2 different sites
This error is caused by the query you are running in the screenshot not completing in time when writing to the MySQL database which in turn is using too many resources which is then terminated before it continues to cause a high load on the server.
———-
http://www.jordansnyc.com/productsnew.php
1053 – Server shutdown in progress
select distinct p.products_id, p.products_date_available, p.products_date_added, p.products_image, p.products_tax_class_id, pd.products_description, pd.products_name, if(s.status, s.specials_new_products_price, p.products_price) as products_price from products p left join specials s on p.products_id = s.products_id, products_description pd, products_to_categories p2c, categories c where p.products_status = ’1′ and p.products_id = pd.products_id and pd.language_id = ’1′ order by p.products_date_added desc limit 9
[TEP STOP]
2013 – Lost connection to MySQL server during query
select count(*) as total from sessions where sesskey = ’5ce9e931df00fd34478995d50783f3cd’
[TEP STOP]
&
1053 – Server shutdown in progress
update products_description set products_viewed = products_viewed+1 where products_id = ’1186′ and language_id = ’1′
[TEP STOP]
2006 – MySQL server has gone away
select count(*) as total from sessions where sesskey = ’5ce9e931df00fd34478995d50783f3cd’
[TEP STOP]
need site to load faster again since error is causing load to slow down.
MAKE SURE YOU KNOW WhAT TO DO BEFORE BIDDING
I need errors fixed in my coding my host is saying. please bid if you have experience in field and can fix all errors im running into. maby a diagnostics can be ran so all errors are resolved in code….i do not want anyone that wants to get payed before errors are fixed. i had a programmer who said can do it and after he got in said everything looks fine. after errors resolved i will gladly pay… below is wut host said and under are 2 main error messages i am receiving on 2 different sites
This error is caused by the query you are running in the screenshot not completing in time when writing to the MySQL database which in turn is using too many resources which is then terminated before it continues to cause a high load on the server.
———-
http://www.jordansnyc.com/productsnew.php
1053 – Server shutdown in progress
select distinct p.products_id, p.products_date_available, p.products_date_added, p.products_image, p.products_tax_class_id, pd.products_description, pd.products_name, if(s.status, s.specials_new_products_price, p.products_price) as products_price from products p left join specials s on p.products_id = s.products_id, products_description pd, products_to_categories p2c, categories c where p.products_status = ’1′ and p.products_id = pd.products_id and pd.language_id = ’1′ order by p.products_date_added desc limit 9
[TEP STOP]
2013 – Lost connection to MySQL server during query
select count(*) as total from sessions where sesskey = ’5ce9e931df00fd34478995d50783f3cd’
[TEP STOP]
&
1053 – Server shutdown in progress
update products_description set products_viewed = products_viewed+1 where products_id = ’1186′ and language_id = ’1′
[TEP STOP]
2006 – MySQL server has gone away
select count(*) as total from sessions where sesskey = ’5ce9e931df00fd34478995d50783f3cd’
[TEP STOP]
need site to load faster again since error is causing load to slow down.
MAKE SURE YOU KNOW WhAT TO DO BEFORE BIDDING
I would like to find ea programmer that can amend an ea based on the indicator BBand_stop.
The EA is based on TF 1M and will refer to other TF (5M,15M etc for trend)
i wish to add max no of trade per OP (BUY or SELL). If i set MAX TRADE=5,
The ea will only trade (according to trend let say a BUY trend) max of 5 position). it will stop and wait for SELL trend and start to trade only 5 sell OP.
I want auto program which will place orders as follows:
1. Place ‘ buy stop at ’3′ pips + Highest price between GMT ’0:00′ to GMT ’8:00′, At GMT 8:00
2. Place ‘ Sell stop at ’3′ pips lower than lowest price of GMT ’0:00′ to GMT ’8:00′ , at GMT 8:00
3. T/P price +/- 10 pips for both above.
4. Stop Loss is at half of the above highest and lowest for each order.
5. Time out GMT 10:00 ( cancel orders , this will only operate once a day.)
Please make all Number figures can be changed as variable. Namely, time, pips,
And I use Alpari with 5 desmopoints figures.
I want auto program which will place orders as follows:
1. Place ‘ buy stop at ’3′ pips + Highest price between GMT ’0:00′ to GMT ’8:00′, At GMT 8:00
2. Place ‘ Sell stop at ’3′ pips lower than lowest price of GMT ’0:00′ to GMT ’8:00′ , at GMT 8:00
3. T/P price +/- 10 pips for both above.
4. Stop Loss is at half of the above highest and lowest for each order.
5. Time out GMT 10:00 ( cancel orders , this will only operate once a day.)
Please make all Number figures can be changed as variable. Namely, time, pips,
And I use Alpari with 5 desmopoints figures.
I am looking for a programmer to code an EA that uses trailing stops.
The details will be posted to the winning bidder
I need to create an EA the enters trade based on the agreement of a number of MT4 custom indicators (6-8). Basically
1- Entry: when all indicators agree enter long/short position. Place stop loss at the value of one of the indicators or at highes high 2/lowest low 2 (this will be decided later)
2- Exit: the Ea should manage the trade after initializing it. The exit will be based on one of the custom indicators. The indicator paint an arrow (up or down) I need the EA to move the stop to the low or high of the bar where the first arrow appears after the trade is open. If a new arrow appeared the EA will repeat the process.
Important Notes:
1- The indicator print arrow up/down intra-bar i.e. before the bar close. The EA should be “wise enough” to act on the signal only after the current bar close moving the stop to the low of the bar if there is an open long trade and there is an arrow after the bar close and moving the stop to the high of the bar if there is an open short trade and there is an up arrow after the bar close..
2- The trade will have an initial stop loss and might have a profit target. The EA should act moving the stop according to the rules regardless of wether the trade have a profit target or not and overwriting the current stop loss.
3- The EA should be wise enough also to act only if there is an open trade long or short, if there is no trade the EA shouold do nothing.
Subscribe in a reader
or
by Email (for daily job notification)
