Get a Freelance Job

Need an EA using a continuous buy-sell standing.
Entry when short EMA cross long EMA, Stop and revert on next following crossing with opposed signal.
Actual exit will be done manually using other indicators, the stop and revert order is as a safety valve in case I missed the manual exit.
EA will be used in less than 10 designated pairs.
Entry points should be adviced by mail. Lot size to be adjusted manually.
SL or TP to be added manually as option.
Would like to add a TDI extra crossing signal as criteria if possible for entry point.
After manual exit of position, the EA buy or sell order should be activated again in the next crossing of the designated pair.
Cant be any simplier.
I will need the MQ4 file as well when the project is done and the possibility to adjust signals once tested.
Already have a 3MA crossing MA that can be adjusted if needed.

Hi there. Posted recently and was delayed to to further testing being done. Need a programmer for Easy Language for Tradestation. Would like an alert to sound on the crossover – I may or may not enter the trade upon inspection – then if I do nothing it will automatically end at the next cross. Would like to be able to vary the inputs for the EMA.

I need the attached indicator changed from EMA to Weighted MA. The output should look like.

MA Method: Linear Weighted

Apply to: Weighted Close (HLCC/4)

Modify the indicator that was already written for me. The modifications should provide the following functionality:

Modify trade signal criteria to include different setups for Long and Short signals.

Long:
Fast EMA and Slow EMA cross over Slower EMA (send long signal via arrow, popup and email)

Short:
Fast EMA and Slow EMA cross under Slower EMA (send short signal via arrow, popup and email)

The types of MAs and the price mode muct be configurable for each EMA in both situations. I want to be able to select whether the EMA is applied to High, Low, Open or Close for each scenario.

All I want is to have a target placed with in the EA. The pdf explains how the EA is supposed to work. I want a target placed like this: Short: [(50% of the position)=[EMA(12,high)-open of currentbar(0)]*95%]-close of currentbar(0)];

Long: [(50% of the position)=[(currentbar(0)open-currentbar(0)EMA(12,low)]*95%]+close of currentbar(0)];

50% and 95% are optimizable.

If short and current price > SMA(72,high), then exit;
If short and currentbar low > EMA(12,high), then exit;
If long and current price < SMA(72,low), then exit;
If long and currentbar high < EMA(12,low), then exit;

Trailing stop moves in 10 pip increments until it reaches the entry.

Percent bal at risk:(2%) and is optimizable.

I have a detailed email with some easy language. Please provide your email and phone number if possible.

Kevin Koceja

I am looking for a very simple EA. I want the EA to send an alert based on a double EA crossover. The logic is:

Adding Market orders to The Ladder

Marcelo,

After reviewing the EA, I really like that you allowed it to place orders for backtesting. I would like to EXPAND THAT FEATURE so I can run it in the live market. Since I am modifying the Backtest system you added, I would expect you to charge me more since it is 2 EA’s in one now. I outline the changes below: Adding the 5 ema, and ability to adjust the lot / 10,000 $ in the account.

This EA will be triggered to stack 1 INSTANT Market Order when all orders are closed and there are NO REMAINING PENDING ORDERS. When ALL LIVE ORDERS ARE CLOSED and NO MORE PENDING ORDERS exist, this EA will place an INSTANT MARKET ORDER.
This order, EA will have a 20 pip Take Profit, and a 100 pip Stop Loss.
To determine a BUY or a SELL, the EA will look at which direction the 5 EMA is pointing in that timeframe. If the 5 EMA is pointing up or positive, then it will place a BUY with 20-TP and 100-SL. If the 5 EMA is pointing down or negative, then it will place a SELL with 20-TP and 100-SL.
This way we will be able to hit more take profits if we are placing orders with the trend instead of alternating between Buy / Sell.
There will be an option to set the LOT SIZE. THIS OPTION WILL BE related to the Account Balance being traded in 10,000. This lot size will apply to all orders. Initial and Hege orders.
For Example: (X) lots / 10,000 $ in the account. So, if we put (1) here, then it would stack 1 lot orders until the account got up to 11,000 $. At this point it will stack 1.1 lots, and so on.
The EA can only place 1 immediate order at a time. After that order, the pending orders can kick in and eventually close out. At this time, all pending orders are deleted and the EA then starts all over again with the 1 initial market order in the direction of the 5 EMA.

Question: (Some Metatrader Brokers are using more numbers after the decimal point.
FOR EXAMPLE: The GBPJPY on IBFX is now at 147.76
The GBPJPY on FXCM is now at 147.762
CAN THIS AFFECT THE WAY THE EA OPERATES?

1HR TREND SYSTEM BASED ON EXPONENTIAL MOVING AVERAGE

System Setup

Time-Frame 1hr

Period= 14
Ma Method= Exponential
Apply To = Close
Style= Red

Period = 7
Ma Method = Exponential
Apply To = Close
Style = Yellow

Period= 50
Ma Method = Exponential
Apply To Open
Style = Spring Green

Sell Setup

The 7EMA Cross 14 EMA from Above, Confirm Strong Sell Trend When Both EMA Narrowly Cross 50 EMA

Buy Setup

The 7EMA Cross 14 EMA from Bellow, Confirm Strong Buy Trend When Both Narrowly Cross 50 EMA Above

Set TP to 100 Pips
SL to 50 Pips
Trailing Stops to 25 Pips

Pairs: EURUSD, GBPUSD, NZDUSD, USDJPY, Can Also Works on GBPJPY & EURJPY

In the following pages, a trade sample of exactly signal generated by the system even in the choppy and sloppy market of December will be display to you thus proving the efficient of this powerful but easy-to-follow trading StraFinally, the system is guarantee you of 85-90% on your ROI if is duly followed.

Also Note that good money management will always protect your capital while increasing your profit in a great way in the forex market

PAYMENT:
Payment by paypal after the test 5 days trail version of EA

Thank for your time

I need the following:
Within a word document there will be an image of a “send” button (at the end of a form that was already created). Once the person presses the send, they get
1. an option to continue
2. once they click “ok” the document is saved (the name of the document changes, it becomes the “actual document name” & user name.
3. The document then becomes an attachment on the default email of the computer
4. the email (outlook) opens and there is already the email address and the subject line filled in with the document as an attachment.
5) they then have the option to send it like that or write an extra something.
6) when it’s sent, the word document is brought up again and they have the option to close it or not.
7) if they close it, it’s closed on whatever they saved it on, if they chose to not close it, it remains open.
end.

Hi, I need ema crossover EA

The EMA Crossover EA trades long and short based upon 2 EMAs crossing over each other. When the fast EMA moves above the slow EMA the strategy buys. When the fast EMA moves below the slow EMA it sells. Existing position should be closed in case of reversal signal.

Exit logic :

1 Offload half position in ? amount off pips /depends how many pips is stop loss/ (close to 1:1 risk/reward)

2 Offload 1/25 position in ? amount off pips /depends how many pips is stop loss/(close to 2:1 risk/reward)

3 Left 1/25 of position is Trailing stop

It has to have an option to switch off the exit logic, so I can operate with stop loss and take profit manually.

I also need stop loss, brake even stop loss, trailing stop, available.

Thanks.
Anton

I need to someone to help create a simple MT4 indicator in Metaquote language. The indicator should simple draw an up arrow if we have to consecutive closes above both 10 EMA (exponential moving average) and 20 EMA, and a down arrow if we have 2 consecutive closes below both 10 EMA and 20 EMA. Preferable the length of the 2 moving averages are as input. In mathematical form:

C0: current candle, C1: close of one candle earlier, C2 close of two candle earlier, C3 close of 3 candles earlier

Up arrow:

C1>10EMA and C1>20EMA and C2>10EMA and C2>20EMA and C3<10EMA or C3<20EMA

Down arrow:

C1<10EMA and C1<20EMA and C2<10EMA and C2<20EMA and C3>10EMA or C3>20EMA

Trigger on candle close only if possible, i.e. when a new candle opens (C0) the indicator check C1, C2 and C3 conditions.

Please quote price and time.

Best Regards,

I need some help here to calculate exponential moving average’s slope on metatrader 4.
Well i guess it is a quite easy job for a good programmer may be taking a while only.

here is the code i need, this is the metastock version.

pds:=Input(“EMA periods”,2,2520,13);
x:=Input(“use Open=1 High=2 Low=3 Close=4 Volume=5 P=6″,1,6,4);

x:=If(x=1,O,If(x=2,H,If(x=3,L,If(x=5,V,If(x=6,P,C)))));
EMA:=Mov(x,pds,E);
EMAprev:=Ref(EMA,-1);

y:=Min(EMA,EMAprev)/Max(EMA,EMAprev);
EMAratio:=(If(EMA>EMAprev,2-y,y)-1)*100;
EMAper:=If(EMAratio<0,Atan(EMAratio,1)-360,
Atan(EMAratio,1))*10/9;
signal:=Mov(EMAper,pds,E);

EMAper

this is all, quite easy i think however i cannot handle it.

Looking forward to hear from a good programmer.

hi, i want to make an ea that uses ‘relative strength index’ ( with two ema for the rsi) and 3 ema each in 3 different timeframes. this ea also used ATR (*n)to set stoploss and take profit. all these (rsi, all ema, ATR and timeframes)are to be set as variables.
and open post also can be set for all open post, not for one pair only. For example, i want the ea to open maximum 5 posts at a time although i put the ea on 10 different charts.

those interested, please pm me for more info. thank you.

The required indicator is based on AlphaTrend &amp; EMA 12,26 (both attached) which filter each other.

See the attached zip files containing all the pictures.
Description for the pictures in ‘Finished Product’ file (i.e. how the indicator should trade) is given below:

- BUY SIGNAL – When a BLUE ARROW appears first, supported by BLUE BARS or when a BLUE BAR appears first, supported by a BLUE ARROW
- SELL SIGNAL – When a RED ARROW appears first, supported by RED BARS or when a RED BAR appears first, supported by a RED ARROW

All others should be ignored as false signals. They are marked with the ‘x’ sign while the red vertical lines are the correct signals for BUY/SELL.

Now, I’ve coded the first condition whereby if the AlphaTrend changes color first before the EMA Arrow appears after, the required indicator will show a new arrow. The picture file named ‘Half-done Product’ shows what was achieved and the 2nd condition to be added.

I also attached the half-done indicator so all that’s needed is to add this 2nd condition:
If the EMA Signal Arrow appears first and the AlphaTrend changes color to match the EMA afterwards, the new indicator should also appear to show there’s an agreement. The 2 conditions apply to buy &amp;amp; sell and only alert when a candle closes.

I need your best quote please. If we can arrive at the right price with complete job satisfaction, we’ll go for 2 EA projects.
Duration requested: 24-48 hours max.

Hello,

i have a ea that enter a trade with ema and rsi ( ema cross when rsi is on a specific level)

but i need a ea for breakout.

the ea shouldn

Hello,

i have a ea that enter a trade with ema and rsi ( ema cross when rsi is on a specific level)

but i need a ea for breakout.

the ea shouldn

I have an EA that rules/logic needs fixing.

EMA(5) – RED
EMA(10) – Purple
EMA(14) – Orange
EMA(21) – Blue
EMA(50) – Yellow

What I need to be done is simple.

If the red line-EMA(5) goes down through all the other lines and the yellow-EMA(50) is the

last line on the bottom then you sell. (when reach set about gap in pips)

If the red line-EMA(5) goes up through all the other lines and the yellow -EMA(50) is last

line on top the you buy. (when reach set about gap in pips)

In both situation the yellow has to be the last line it goes through be set about gap in pips

to execute the order.

Now this has to happen on the M15 chart.
On the M15 and H1 with the VerifyTrend Option.
On the M15, H1, H4. Daily with the AditionalTimeFrame Option

Please see attachment with my EA, graphic example(sell condition), and template sample.

http://www.inabalance.com/FixEA.rar

Hello,

i need a programmer, who can build me a ea.

–&gt; 2 Indicators. Standart MA and RSI

the ema