Get a Freelance Job

I’m looking for a programmer who can help me do the following:

1) Specifications:

a) 1) Inside the admin, members area and optin form area, when I hit the update button, I receive these errors:
Any dollar amount like $37 or $100 will update to “0″.
If I put any variables like: $ ” ‘ { } ect… it will turn into a /

b) 6 Default members and the 7th rotated position were unable to update the Autoresponder code automatically. It updates on the members area but it doesn’t update on the home page. Therefore, when people subscribe, it doesn’t work. I have to put them manually. It’s supposed to be automatic.

c) The tracking for the admin and members don’t work.
It only shows stats for the Free Members and the total sales.

Free Members:
Upsell Buyers:
Downsell Buyers:
Total Sales:

d) The split affiliate commission doesn’t work. I set it at 75%. I’m supposed to get commission for the 1st sale and every 4 sales but it doesn’t work properly.

2) I’ll provide you my domain/URL and hosting login info.

3) Turnaround time: Must be done in 3-7 days

4) Payment: Escrow

5) Legal: You can not use my script or sell it.

Make sure you communicate through the message board and have good feedback as I tend to choose these types of people. If you have example of you pass work and you think you are up for the project, bid now.

Talk to you on the inside.

What I need or require:
A Fully Customizable Expert Advisor (For MT4) based on my Trading Strategies.

I’ll need an EA which is capable to run up to ten instances of candlestick patterns.
Each candlesticks pattern should have their individual Entry and MM settings.
Each independent candle within a candlestick pattern should be fully customizable.

***Note: When I mention ‘OR’ in the following, it means that I’d like to have both options open for me. So, you’ll still need to code all of them into the EA.

Before we begin on the candlesticks settings, let’s start off with some of the General settings this EA should consist of:
- Trading Session: Start and End session in Hours, based on local Broker’s time.
eg, Start Session 10 and End Session 20, would mean Start trading at my MT4 broker’s 10AM and ends at 8PM

- Total Open Trades Allowed: eg, a ’3′ would mean the maximum total trades currently opened is 3, any other entries would not be opened at all.

- General Money Management:
- Position Size opened based on ‘A’% of Account Balance, OR
- Position Size opened based on SL

- Sound Alert whenever an entry condition is met

- Email Alert whenever an entry condition is met

- An option to disallow the EA to open any trades, but keep the “Entry Condition Met” Sound and Email Signals on. In a sense, it will act like an indicator rather than an EA.

The General Settings are done, so now we move on to what a Typical CandleSticks Pattern should consist of, and I’ll need 10 instances of these patterns all customizable:

Instance 1 CandleSticks Pattern:

Part 1
-No of candlesticks This Pattern should consist of:
– 3 (Candle A, B and C. Candle D and E will be turned off), OR
– 4 (Candle A, B, C and D. Candle E will be turned off), OR
– 5 (All candles in this pattern will be turned on).

Each candlesticks should consist of a Min 2 candles and Max 5 candles.

Part 2
The Candle Stick Pattern
Note: Candle A will be the most recent candle, B the second most recent, and so on.

Candle A
Ability to define how the candle looks like:
- Bull or Bear Candle

- Min and Max Length of Candle (High Low)
- Min and Max Length of Candle Body
- Min and Max Length of Upper Shadow
- Min and Max Length of Lower Shadow

- Opened lower to Candle B’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened lower to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened lower to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Opened higher to Candle B’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened higher to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened higher to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed lower to Candle B’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed lower to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed lower to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed higher to Candle B’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed higher to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed higher to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

Candle B
- Bull or Bear Candle

- Min and Max Length of Candle (High Low)
- Min and Max Length of Candle Body
- Min and Max Length of Upper Shadow
- Min and Max Length of Lower Shadow

- Opened lower to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened lower to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Opened higher to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened higher to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed lower to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed lower to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed higher to Candle C’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed higher to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

Candle C
- Bull or Bear Candle

- Min and Max Length of Candle (High Low)
- Min and Max Length of Candle Body
- Min and Max Length of Upper Shadow
- Min and Max Length of Lower Shadow

- Opened lower to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Opened higher to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Opened higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed lower to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed higher to Candle D’s O/H/L/C: Yes/No/Doesn’t Matter
- Closed higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

Candle D
- Bull or Bear Candle

- Min and Max Length of Candle (High Low)
- Min and Max Length of Candle Body
- Min and Max Length of Upper Shadow
- Min and Max Length of Lower Shadow

- Opened lower to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Opened higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

- Closed lower to Candle E: Yes/No/Doesn’t Matter

- Closed higher to Candle E’s O/H/L/C: Yes/No/Doesn’t Matter

Candle E
- Bull or Bear Candle

- Min and Max Length of Candle (High Low)
- Min and Max Length of Candle Body
- Min and Max Length of Upper Shadow
- Min and Max Length of Lower Shadow

Part 3
Entry Condition
- When the Candle Pattern is completed upon the closed of Candle A (most recent candle), initiate one of the following options:
– Buy, OR
– Sell, OR
– Buy order placed on Candle ‘X’ High or Low, with the option of + or – ‘N’ Pips, OR
– Sell order placed on Candle ‘X’ High or Low, with the option of + or – ‘N’ Pips.
* Candle ‘X’ refers to the selection of Candle A, B, C, D or E
* ‘N’ Pips refers to the amount of Pips as a margin added or subtracted to Candle ‘X’ High/Low. For instance, if Candle ‘X’ has a high of 1.5000, and the predetermined ‘N’ is +5, then the Buy Order shall be placed as 1.5005.

Part 4
Money Management – Should be independent for each individual candlestick pattern.
The following should be placed the instant a trade has been placed/executed:

Stop Loss
- Stop Loss in Pips, eg. 50 pips, OR
- Stop Loss = Candle ‘X’ High or Low, with the option of + or – ‘N’ Pips, but up to a Maximum of ‘M’ Pips

Take Profit
- TP in Pips, eg. 50 pips, OR
- TP = Candle ‘X’ High or Low, with the option of + or – ‘N’ Pips, but up to a Maximum of ‘M’ Pips

Set SL to BE
- When position has a floating profit of ‘Y’ Pips, Set SL to BE +/- ‘Z’ Pips
* If ‘Y’ Pips is set to 20, that means when the position reaches 20 pip profit, “Set SL to BE will be executed”.
* ‘Z’ Pips: I’d love to have the option to set SL to BE with a bit of profit margin. For example, If BE point for a Buy position is 1.5000, and ‘Z’ is set at +5, when Set SL to BE is executed, the new SL will be set to 1.5005.

Specific expertise that I am seeking:
If you have read and understand what this EA is up to, and already have a concrete idea on how to get it done… Then I’m depending on you!

Timeframe for delivery:
Max 4 Weeks, but You are the expert. You tell me

Finally:
I am no EA Expert nor a decent Programmer. I tried to state ‘exactly’ what I wanted with the EA in what I thought is a logical sequence. Tell me what you can do, what you can’t and what is impossible even in the year 2011.

If you think you have something better to add to this, Great! Let us discuss about it.

Thank you!

See this page:
http://tvshack.net/tv/King_of_the_Hill/season_13/episode_16/

He using jwplayer to stream video from zshare. I made one myself but unfortunately it doesn’t work on browser that doesn’t use Gecko engine (it means it doesn’t work on IE, Opera and Chrome).
I know the difference between his script and my own. He is using zshare stream URL, while I’m using zShare download URL.

This is an example of zShare stream URL:
http://dl025.zshare.net/stream/255c6fb0a6a5e9d9dfd2c695f1c3c80c/68000359/1257482777/ns15.flv/70e639b2efa7d526b4e2c31b2cfee258/5030251120

And this is an example of zShare download URL:
http://dl025.zshare.net/download/d510e9e9723d5ced4347de61da7f2c98/1257473922/68000359/ns15.flv

I try to made my own zShare stream URL generator but I’m stuck on that gibberish (md5 hash — I think) on that zShare stream URL (the codes after filename — 70e639b2efa7d526b4e2c31b2cfee258) .. One thing that I know for sure that this codes is unique for a video and doesn’t change like the other hash (255c6fb0a6a5e9d9dfd2c695f1c3c80c). I don’t know where to get that codes.

If you examine that tvshack URL, you’ll found their jwplayer use this URL:
http://67.223.254.167/zs/?id=ZTliZTZiOGFjMTJhNWVkNWRiMjY0OWY3Njg0YjJlZDcuT1RJME1UTXdiRE16TXprM05qZzJNZz09
as a flv source file. That link is generating that zShare stream URL and redirect the jwplayer request to there.
So, your job is to create that kind of script and make sure it works on jwplayer that played on IE, Opera and Chrome.

See this page:
http://tvshack.net/tv/King_of_the_Hill/season_13/episode_16/

He using jwplayer to stream video from zshare. I made one myself but unfortunately it doesn’t work on browser that doesn’t use Gecko engine (it means it doesn’t work on IE, Opera and Chrome).
I know the difference between his script and my own. He is using zshare stream URL, while I’m using zShare download URL.

This is an example of zShare stream URL:
http://dl025.zshare.net/stream/255c6fb0a6a5e9d9dfd2c695f1c3c80c/68000359/1257482777/ns15.flv/70e639b2efa7d526b4e2c31b2cfee258/5030251120

And this is an example of zShare download URL:
http://dl025.zshare.net/download/d510e9e9723d5ced4347de61da7f2c98/1257473922/68000359/ns15.flv

I try to made my own zShare stream URL generator but I’m stuck on that gibberish (md5 hash — I think) on that zShare stream URL (the codes after filename — 70e639b2efa7d526b4e2c31b2cfee258) .. One thing that I know for sure that this codes is unique for a video and doesn’t change like the other hash (255c6fb0a6a5e9d9dfd2c695f1c3c80c). I don’t know where to get that codes.

If you examine that tvshack URL, you’ll found their jwplayer use this URL:
http://67.223.254.167/zs/?id=ZTliZTZiOGFjMTJhNWVkNWRiMjY0OWY3Njg0YjJlZDcuT1RJME1UTXdiRE16TXprM05qZzJNZz09
as a flv source file. That link is generating that zShare stream URL and redirect the jwplayer request to there.
So, your job is to create that kind of script and make sure it works on jwplayer that played on IE, Opera and Chrome.

See this page:
http://tvshack.net/tv/Gossip_Girl/season_3/episode_8/a:163291/

He using jwplayer to stream video from zshare. I made one myself but unfortunately it doesn’t work on browser that doesn’t use Gecko engine (it means it doesn’t work on IE, Opera and Chrome).
I know the difference between his script and my own. He is using zshare stream URL, while I’m using zShare download URL.

This is an example of zShare stream URL:
http://dl025.zshare.net/stream/255c6fb0a6a5e9d9dfd2c695f1c3c80c/68000359/1257482777/ns15.flv/70e639b2efa7d526b4e2c31b2cfee258/5030251120

And this is an example of zShare download URL:
http://dl025.zshare.net/download/d510e9e9723d5ced4347de61da7f2c98/1257473922/68000359/ns15.flv

I try to made my own zShare stream URL generator but I’m stuck on that gibberish (md5 hash — I think) on that zShare stream URL (the codes after filename — 70e639b2efa7d526b4e2c31b2cfee258) .. One thing that I know for sure that this codes is unique for a video and doesn’t change like the other hash (255c6fb0a6a5e9d9dfd2c695f1c3c80c). I don’t know where to get that codes.

If you examine that tvshack URL, you’ll found their jwplayer use this URL:
http://67.223.254.167/zs/?id=ZTA5YjRkZjkwYTVlODU4YTliZDgwMTVmMmFiNjljNGEuYnpZeWJUQnRhekkwTnpJek56QXpNZz09
as a flv source file. That link is generating that zShare stream URL and redirect the jwplayer request to there.
So, your job is to create that kind of script and make sure it works on jwplayer that played on IE, Opera and Chrome.

Hi,

I have a heavily modified version of cubecart which some of the mods are not performing as they should and i need a couple of additional ones.

Ok, the things that need repairing:

When we delete a category from the store, it doesn’t remove it, just removes the wording.

When you search (both in admin & Store front) for a product, it doesn’t bring up the product in the multiple categories it is assigned, just the first category it is assigned to.

SMTP / E-mailing a copy of the order doesn’t work, we used to receive an email telling us the details of the order, we no longer recieve this.

Ok, the additional Mods we would like:

How did you hear about us? on the order checkout page where we are able to collect information to target advertising.

Change the way the stats are calculated, at the moment the store counts up the value of total orders, we would like this breaking down so we can see what we have taken by the month or year.

Download of e-mail address’s and names to a CSV file for entry into another mailing application.

Option to select all product is View Products (Admin)

Optimise and improve “Quicker image manager”, to allow for faster deleting and moving of images.

When product qty = 0 we would like the product to be hidden from view in the store front & listed in an area in the admin section so we are able to see what needs re-ordering or deleting from the store.

I know it seems like a lot but they are small modifications and i am sure they can be done with ease for an experienced programmer

I have a wordpress site that has flash on the sidebar and it did have a peelaway page ear. The flash wont work on the categories page. It is the archive.php. (see url in the PMB)

I even tried to delete the archive.php so it would show on the index.php, but the flash still doesn’t work. Anyone know what the problem is.

Also my editor in wordpress doesn’t work anymore. I think it is because a ftp program compressed the code, but even uploading the original stylesheet doesn’t fix it.

PLEASE DON’T BID IF YOU CAN’T FIX IT!!! I have spent too much time on programmers who don’t read the description and can’t really solve the problem.

I need a recurring 2×2 system that is tied up to AlertPay monthly subscription, with rules and mechanics below.

MX1 System Rules:

1) Entry price is $30, but I must have ability to modify this automatically and easily via Admin login.

2) The $30 recurs every month. For every recurring payment, the customer gets a new header or account in a separate matrix from his previous matrix, thus, he will have 12 separate matrices a year for each of the 12 months. Each of those matrices are not connected to each other. Its as if the member joins a new matrix program every month. (Important Note: recurring payments always go to a new matrix, and NOT anywhere inside a persons previous matrix even if that matrix is not yet filled up. In the new matrix, he may follow his sponsor there, but he can never be under his previous month’s matrix).

Also note that if a member fails to pay a monthly subscription, his downline ‘ROLLS UP’ or gets connected to the next available sponsor up.

Example:

MONTH 1
Each pays $30

……………Soul
……..|……………|
……John……….Sue
..|
Bill

MONTH 2
Each recurs payment of $30: They all follow their sponsor

……………Soul
……..|……………|
……John……….Sue
..|
Bill

MONTH 3
John fails to pay month 3. Bill ‘ROLLS UP’ to his next available paid sponsor, who is Soul.

……………Soul
……..|……………|
……Bill……….Sue
..|

3) SPILL OVER IS OK, but only within a slots 2×2 structure. If his structure is filled up, his new recruits goes to his new 2×2.

4) Of course, if a member has many referrals, it will cause him to fill his matrix and produce a new matrix. His further new referrals will go to this new slot. If this new matrix fills up with his many further referrals, he will have a new matrix again where the referrals will come in, and so on.

5) Commissions are only paid out to a person who fills up his own 2×2. Once a 2×2 is full, the person gets paid $100 (this must be easily modified via Admin).

6) Here is where the recycling is vital… ALL NEW RECYCLED ACCOUNTS GO TO THE NEXT AVAILABLE OPEN SLOT IN THE MEMBERS REFERRER. Down below under the line is a diagram of how this works.

NOTE: The first slot in the company, which is at the top, when it recycles, creates another slot at the top again (it’s second slot) at the same level as the first top slot. So as long as the top slot keeps recycling new top sllots are always created. For example…

……………Top ……………Top2
……..|……………|
……Ken……….Joe >>>>>>>>>>>>>
.|……….|…….|…….|
Bob…..Sally…Peter…James

7) In the backend, the genealogy tree must be clear. People can select ‘MATRIX 1′ to see their 1st Matrix. Then if they have already recycled or recurred in payments, they can view ‘MATRIX 2′, and so on.

AlertPay will be the pay processor. Please make it easy to auto-activate entries (after payments) and mass payout commissions (automatically at the 10th day of the month in just 1 click, based on performance up to the last day of the previous month).

9) Cut off is every last day of the month and payout is every 10th day of the next month. Between the last day of the month and the 10th day of the following month, the system lists down the accounts that failed to re-subscribe and accounts that canceled their subscriptions… and takes these accounts out of the system, thereby rolling up the paid subscribers to the next upline who is paid.

10) Product is a daily inspirational video package, so it’s viewable or downloadable. People must be sent a download link once they submit payment. Viewing or download system must be secured so not anyone can get its URL and download the products.

11) Members must be able to recruit new members using their sub-domain (i.e. subdomain.domain.com), and not just an affiliate link. So subdomains must automatically be created based on a new member’s username. When signing up, members must be able to check if subdomain is still available, so they can amend their choice username.

12) The admin and backend system must have the features present in the other 2×2 systems out there.

13) New recruits cannot join free. They must pay first before getting into the system.

____________________________________________________________________________________________________________

Below is a sample on how the basic recycling works:

1) Assuming it starts with Soul, who joins by paying $30…

SOUL

2) Soul recruits John, who also pays $30…

….Soul
..|
John

Soul doesn’t get any commissions yet until his 2×2 is full

3) Soul recruits Sue, who also pays $30…

……..Soul
..|……………|
John……….Sue

Soul doesn’t get any commissions yet until his 2×2 is full

4) John recruits Bill, who pays $30…

……………Soul
……..|……………|
……John……….Sue
..|
Bill

5) John recruits Ken, who pays $30…

……………Soul
……..|……………|
……John……….Sue
..|……….|
Bill……..Ken

No one gets any commissions yet.

6) Sue doesn’t work out

7) Bill recruits Bob, who also pays $30…

……………….Soul
………….|……………|
………..John……….Sue
……..|……….|
……Bill……..Ken
.|
Bob

No one gets any commissions yet.

John recruits Sally, who also pays $30, and the system places her under Bill.

……………….Soul
…………|……………|
………..John……….Sue
……|………..|
…..Bill……..Ken
.|………|
Bob…..Sally

No one gets any commissions yet.

9) Ken recruits Peter and James, who EACH pay $30…

…………………….Soul
…………….|………………..|
…………..John……………Sue
……..|……………|
……Bill………….Ken
.|……….|…….|…….|
Bob…..Sally…Peter…James

John completes a 2×2, so he gets $100 and gets a new slot in the next vacant slot under his sponsor’s triangle.

…………………….Soul
…………….|………………………|
…………..John………………….Sue
……..|……………|…………….|
……Bill………….Ken………..John (2nd)
.|……….|…….|…….|
Bob…..Sally…Peter…James

Then if John again fills up his 2nd matrix before everyone else,
he goes to the next available slot of his referrer, which is still
under Sue….

………………………….Soul
…………….|……………………………..|
…………..John………………………..Sue
……..|……………|………………..|……………..|
……Bill………….Ken……………John (2nd)…John (3rd)
.|……….|…….|…….|…………..|…..|
Bob…..Sally…Peter…James……Sam…Nick
……………………………………|..|…|..|
…………………………………..A..B…C.D

10) Now look at this very carefully. Once John gets his 3rd account, SOUL WILL HAVE A COMPLETE 2×2, SO SOUL WILL HAVE A NEW ACOUNT IN THE NEXT AVAILABLE SLOT OF HIS SPONSOR. If he is company direct, a new company direct head for Soul will be created.

11) Then if John completes his 3rd account, he will go to the next available open slot of his sponsor Soul, which is at the 2nd account of Soul…

…Soul (2nd acct)
….|
John (4th acct)

12) Now here’s the vital mechanic about the recurring payment… if Soul recurs payment after the examply in (11), his new slot will not go under Soul 02 because our rule is RECURRING PAYMENTS DO NOT GO UNDER A MEMBER’S PREVIOUS TRIANGLE. Thus for the recurring payment, Soul will have a new separate 03. The same is true with John. His new slot from recurring payment (his 5th slot), will not go under Soul’s 2nd account, but in the account of Soul that recurred for the second time, which is Soul 03. So the recurred diagram for them is…

…Soul (3rd acct)
….|
John (5th acct)

In other words, a person’s 2nd month recurring will follow his sponsor’s 2nd month slot as well. A person’s 3rd month recurring will follow his sponsor’s 3rd month recurring as well, and so on.

I hope the above scenario is clear in developing the logic and algorithms for this script. Please email me if you have any questions. Thank you.

All you need to do is clone this script: http://brutetools.netii.net/english/simulateur.php

It works like this:

Data should be parsed directly from MyBrute.com.

And oh, I just want a simple addition. For example, if brute named blahblahblah doesn’t exist at MyBrute.com, then the fight should not continue. A message that says: “Brute blahblahblah doesn’t exist” should prompt.

For instance, this one:
http://brutetools.netii.net/english/simulateur.php?nombrutea1=jehzeel&levela1=300&nombruteb1=&levelb1=&nombrutea2=235rsfaweraw&levela2=300&nombruteb2=&levelb2=

The brute named “235rsfaweraw” doesn’t exist at MyBrute.com, so that fight should not continue. But it still goes on. I think that’s just a quick patch to check whether or not this brute or that brute exists.

That’s it. I know you know what I mean. If you have clarifications, just ask me on chat or e-mail.

All the changes need to be made on the admin side. One thing I want to change on the site is the forms section. I need to be able to categorize the forms into folders. So I want to be able to add any number of folders on that section.

Another problem I am having is text problem. Sometimes the information doesn’t update.

Also on the NC, SC and Virginia property pages I need to be able to add new properties without it flowing off the bottom of the page. If you look at the NC page right now it flows off the page. On all the pages if the information starts to fill the area then it goes to another page.

Also When I try to add images it doesn’t always update. Like on the charity page I tried to add new images but it wouldn’t show up.

Also when I try to view the page on the admin side of the website it doesn’t display the right page.

www.dynamicprop.com is the url

The address above is the next problem site. One thing I want to change on the site is the forms section. I need to be able to categorize the forms into folders. So I want to be able to add any number of folders on that section.

Another problem I am having is text problem. Sometimes the information doesn’t update. I think its the same problem that you just fixed on the mcclainbarr services page.

Also on the NC, SC and Virginia property pages I need to be able to add new properties without it flowing off the bottom of the page. If you look at the NC page right now it flows off the page.

Also When I try to add images it doesn’t always update. Like on the charity page I tried to add new images but it wouldn’t show up.

Also when I try to view the page on the admin side of the website it doesn’t display the right page.

www.dynamicprop.com is the url

Hi, I have a webpage with a search form on it:
http://s117440810.onlinehome.us/gofly-clean/index.php

It has some problems in Internet Exploer:
- “Departure” and “destination” fields in the Flights section doesn’t work correctly (shows up white blank box)
- Calendar datepicker doesn’t show up in explorer
- Form elements’ CSS doesn’t look like in other browsers

I need these problems to get fixed.
Thanks

Hello and thanks for reviewing our post.

We are seeking honest hard working people to join our existing marketing team and help with our permanent SEO campaign.
Even though you are part of the team you must be a self starter and able to make judgment calls with common sense and work completely solo.

Your responsibilities to include but not limited too:

We will supply you several examples but you will still need to create all your own tools via word docs and spreadsheets to keep an organized record to submit daily to semi-daily updates to us with all articles you write and login info and url’s of resources being utilized.

Forum Postings:
You will need to search the internet yourself with our keywords and find relevant forums to post our articles and comments using your own creativeness with our link and description in the signatures of each forum and blog you choose. Pre write articles that can potentially be answers to common questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Blog postings:
You will need to search the internet yourself with our keywords and find relevant blogs to post your own comments and articles using your own creativeness with our link and description in the signatures of each forum and blog you choose. Pre write articles that can potentially be answers to common questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Article Submissions:
You will need to search the internet yourself with our keywords and find relevant article submission services post our articles and comments using your own creativeness with our link and description in each of them. Pre write articles that can potentially be answers to common forum questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Link Submissions:
You will need to search the internet yourself for classified ads and find places like the ones below and submit our link ads to them. There are hundreds of these free submission services.
classifiedadsubmitter
101-website-traffic
mega promoter
classifiedclub

This will consist of only free places and from time to time on your suggestions and from places we choose we will add paid resources and supply you the urls and login info to add to your lists. Our main concern is that we posting one way links to our website using free resources.

We are seeking full time people for this. If you don’t have enough places in the list to take up a 6 -8 hour day then you should be adding more to take up your day, even if non relevant to our keywords but i doubt that will be a problem.

All payments and bids will be via escrow on an a weekly basis and released upon results and proper updates.

Hello and thanks for reviewing our post.

We are seeking honest hard working people to join our existing marketing team and help with our permanent SEO campaign.
Even though you are part of the team you must be a self starter and able to make judgment calls with common sense and work completely solo.

Your responsibilities to include but not limited too:

We will supply you several examples but you will still need to create all your own tools via word docs and spreadsheets to keep an organized record to submit daily to semi-daily updates to us with all articles you write and login info and url’s of resources being utilized.

Forum Postings:
You will need to search the internet yourself with our keywords and find relevant forums to post our articles and comments using your own creativeness with our link and description in the signatures of each forum and blog you choose. Pre write articles that can potentially be answers to common questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Blog postings:
You will need to search the internet yourself with our keywords and find relevant blogs to post your own comments and articles using your own creativeness with our link and description in the signatures of each forum and blog you choose. Pre write articles that can potentially be answers to common questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Article Submissions:
You will need to search the internet yourself with our keywords and find relevant article submission services post our articles and comments using your own creativeness with our link and description in each of them. Pre write articles that can potentially be answers to common forum questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Link Submissions:
You will need to search the internet yourself for classified ads and find places like the ones below and submit our link ads to them. There are hundreds of these free submission services.
classifiedadsubmitter
101-website-traffic
mega promoter
classifiedclub

This will consist of only free places and from time to time on your suggestions and from places we choose we will add paid resources and supply you the urls and login info to add to your lists. Our main concern is that we posting one way links to our website using free resources.

We are seeking full time people for this. If you don’t have enough places in the list to take up a 6 -8 hour day then you should be adding more to take up your day, even if non relevant to our keywords but i doubt that will be a problem.

All payments and bids will be via escrow on an a weekly basis and released upon results checked with our link analyzing software, results are always obvious.

Hello and thanks for reviewing our post.

We are seeking honest hard working people to assist us with our permanent SEO campaign.
You must be a self starter and able to make judgment calls with common sense.

Your responsibilities to include but not limited too:

We will supply you several examples but you will still need to create all your own tools via word docs and spreadsheets to keep an organized record to submit daily to semi-daily updates to us with all articles you write and login info and url’s of resources being utilized.

Forum Postings:
You will need to search the internet yourself with our keywords and find relevant forums to post our articles and comments using your own creativeness with our link and description in the signatures of each forum and blog you choose. Pre write articles that can potentially be answers to common questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Blog postings:
You will need to search the internet yourself with our keywords and find relevant blogs to post your own comments and articles using your own creativeness with our link and description in the signatures of each forum and blog you choose. Pre write articles that can potentially be answers to common questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Article Submissions:
You will need to search the internet yourself with our keywords and find relevant article submission services post our articles and comments using your own creativeness with our link and description in each of them. Pre write articles that can potentially be answers to common forum questions to make it easier. Build organization tools. If the entire signature doesn’t fit use your creativeness to shorten them.

Link Submissions:
You will need to search the internet yourself for classified ads and find places like the ones below and submit our link ads to them. There are hundreds of these free submission services.
classifiedadsubmitter
101-website-traffic
mega promoter
classifiedclub

This will consist of only free places and from time to time on your suggestions and from places we choose we will add paid resources and supply you the urls and login info to add to your lists. Our main concern is that we posting one way links to our website using free resources.

We are seeking full time people for this. If you don’t have enough places in the list to take up a 6 -8 hour day then you should be adding more to take up your day, even if non relevant to our keywords but i doubt that will be a problem. All payments will be made via escrow on an a weekly basis and released upon results checked with our link analyzing software, results will be obvious.

Surround Sound Controller

background:

Surround Sound is what puts sound effects and ambiance noise in the rear channels in a movie theater, like stereo but with a left and right rear. Surround Sound often includes a subwoofer which is designated as a .x with x being the number of subs; usually one.

Product:

The product that needs a program is a half dome carbon fiber foot pedal. The hardware includes an accelerometer. The accelerometer is a tilt sensor and in this case will cover both left/right and front/back tilt. The name accelerometer comes from the sensing of the acceleration due to change in direction/inertia or G (gravity)

Program:

This is where you come in. I will send a prototype to you upon winning the bid via priority mail. The prototype hooks up to the computer with a mini usb. The firmware of the sensor outputs as a mouse. So you’ve basically got the worlds most awkward mouse to use as a starting place for the control program. That’s where it starts.
1.)

From there the pedal needs a calibration program to run smoothly. The mouse usually scroll up slower than down. To do that will be like calibrating a joystick but a lot different. Because the extremes of how far its tilting only show up in how fast the mouse moves not how far it moves it has to be different than a joystick where you show it all the corners of the screen. It scroll up slower than down. There needs to be a way to fix that. This may be a really heavy task. You may have to get into the very essence of what mice do on a computer. Dig deep and you should find it. After all they were invented by a couple guys in a garage as far as this is concerned. (2 days to trick out the input from the mouse)

2. The next big step is to learn about encoding surround sound. There are many ways to do it. If a open source site says they can help you with DTS than go ahead and pick that, if you find something that will help you encode in Dolby Surround 5.1 then go for it. It does however need to be in a common format. (2 day to research it and get a program ready to encode it)

3. Now we need to make it encode to which ever speakers the mouse is in on the screen. Top of the screen: front channel, bottom: rear channels, bottom left: rear left. That easy, but the tough part is the middle is all of them; so further down is more isolated toward the rear. To do this you will need to think of it as a grid. O,O is the center of the imaginary grid. Negative X is left, negative y is down, just like math class. You will need to be good at graphs and algebra to complete the project. If it were 10 +- in all directions then -5 for x and 5 for y would be a mix of the left speakers and front speakers or the left. All the way to the top or 0 for x and 10 for y would put it in the center channel. 0,0 or the middle of the screen is all of the speakers at once. It should smoothly transition this way just like the THX intro. Full back (bottom screen with the mouse) to full forward (top of the screen with the mouse) will actually do that effect. Doesn’t need to be super elaborate. If the computer gives you pixels or what not just cut it into 5+- in each axis. No biggy wouldn’t help make it any cooler. (2 days for this part)

4. At this point we’ve taken the mouse input and tricked it out to run smoothly like a Ferrari. We’ve done the prep to get the sound encoded into 5.1. Now we need to interface with I/O’s and there software. This part is overwhelming at first but there are only about 3 popular brands of I/Os. Oops an I/o is an input output for audio and computers. They take keyboard, mic, guitar inputs and give them to the computer for it’s programs. They also output and in this case we will use a surround sound receiver ( check one out at Buy.com if you are unfamiliar) but often times they output to headphones or the computer speakers.
The sound will come in through the I/O after the mic, guitar, etc. Then we need to encode it with the pedal and send it right back out with the I/O to the surround sound receiver. == Hey what if I want to use cubase? or garage band. The answer is to keep it simple this go around and be sure it works. If the program is tight, they have a good computer and a smart I/O it should be possible to loop it back around again. It may take two computers but I suspect not. So you can’t use you computer for effects, and synth. Not the worst compromise and something for future consideration.
(2 days it really needs to work at this point and all bugs need to be out)

That’s the project, I need it in eight working days (weekends not included which gets you a break if it’s racking your brain)

Wait what language:

It needs to run on a Mac or a PC. Many music users use Macs. I know they don’t have the majority, despite making very nice computers, yet due to the nature of the customer it needs to work on a mac, no exceptions. And a real stand alone program, not a web app. This isn’t happening online, and I know many of you great web designers may hate that but I am sure if you are as good as your reputations than you are ready to translate.

My Background:

I am a total novice in programing. I can not offer more than theoretical help. I programed in Basic back in elementary school. This is my first company and my first product. If you work in a group fine I really don’t mind. I need it in 8 working days.

Checkups:

Write me to let me know how you are doing. Don’t be afraid to tell me the neat stuff you learn in the process. I love all kinds of knowledge and really wish I knew how to program. You have my utmost respect. So please share. You also need to make progress reports to me, but that doesn’t mean I don’t care about you or don’t like you. It doesn’t mean I don’t want you to have a life. But I do need the work as promised.

I need a PHP/MySql script that does a 2×2 recycling “FOLLOW ME” matrix similar to Infinity800 or EZ2x2. You may check out how it works in www.infinity800.com or www.ez2x2.com, but this script is modified a little bit.

I need a programmer who has already done a matrix script, and who knows how they recycle via a follow the referrer basis.

Here are the rules.

1) Entry price is $30, but I must have ability to modify this automatically and easily via Admin login.

2) The $30 recurs every month. For every recurring payment, the customer gets a new header or account in a separate matrix from his previous matrix, thus, he will have 12 separate matrices a year for each of the 12 months. (Important Note: recurring payments always go to a new matrix, and NOT anywhere inside a persons previous matrix even if that matrix is not yet filled up. In the new matrix, he may follow his sponsor there, but he can never be under his previous month’s matrix).

3) Commissions are only paid out to a person who fills up his 2×2. Once a 2×2 is full, the person gets paid $100.

4) Here is where the recycling is vital… ALL NEW RECYCLED ACCOUNTS GO TO THE NEXT AVAILABLE OPEN SLOT IN THE MEMBERS REFERRER. Below is a diagram of how this works.

5) Spill over by a member’s account is possible but only within his active 2×2 and not beyond that.

6) Of course, if he has many spill overs, it will coz him to fill his matrix and produce a new slot. His other referrals will go to this new slot. If this new slot fills up with his many referrals, he will have a new slot again where the referrals will come in, and so on.

7) Admin can spill over anywhere in the matrix to help everyone.

Admin can also make unlimited company direct accounts

9) In the backend, the genealogy tree must be clear. People can select ‘MATRIX 1′ to see their 1st Matrix. Then if they have already recycled or recurred in payments, they can view ‘MATRIX 2′, and so on.

10) AlertPay will be the pay processor. Please make it easy to auto-activate entries (after payments) and mass payout commissions (automatically at the 7th day of the month in just 1 click, based on performance up to the last day of the previous month).

11) Cut off is every last day of the month and payout is every 7th day of the next month.

12) Product is a daily inspirational video package, so it’s viewable or downloadable. People must be sent a download link once they submit payment. Viewing or download system must be secured so not anyone can get its URL and download the products.

13) Members must be able to recruit new members using their sub-domain (i.e. subdomain.domain.com), and not just an affiliate link. So subdomains must automatically be created based on a new member’s username. When signing up, members must be able to check if subdomain is still available, so they can amend their choice username.

14) The admin and backend system must have the features present in the other 2×2 systems out there.

15) New recruits cannot join free. They must pay first before getting into the system. But Admin can give free accounts.

Below is a sample on how the recycling works:

1) Assuming it starts with Soul, who joins by paying $30…

SOUL

2) Soul recruits John, who also pays $30…

….Soul
..|
John

Soul doesn’t any commissions yet until his 2×2 is full

3) Soul recruits Sue, who also pays $30…

……..Soul
..|……………|
John……….Sue

Soul doesn’t any commissions yet until his 2×2 is full

4) John recruits Bill, who pays $30…

……………Soul
……..|……………|
……John……….Sue
..|
Bill

5) John recruits Ken, who pays $30…

……………Soul
……..|……………|
……John……….Sue
..|……….|
Bill……..Ken

No one gets any commissions yet.

6) Sue doesn’t work out

7) Bill recruits Bob, who also pays $30…

……………….Soul
………….|……………|
………..John……….Sue
……..|……….|
……Bill……..Ken
.|
Bob

No one gets any commissions yet.

John recruits Sally, who also pays $30, and “spills her over” to Bill…

……………….Soul
…………|……………|
………..John……….Sue
……|………..|
…..Bill……..Ken
.|………|
Bob…..Sally

No one gets any commissions yet.

9) Ken recruits Peter and James, who EACH pay $30…

…………………….Soul
…………….|………………..|
…………..John……………Sue
……..|……………|
……Bill………….Ken
.|……….|…….|…….|
Bob…..Sally…Peter…James

John completes a 2×2, so he gets $100 and gets a new slot in the next vacant slot under his sponsor’s triangle.

…………………….Soul
…………….|………………………|
…………..John………………….Sue
……..|……………|…………….|
……Bill………….Ken………..John (2nd)
.|……….|…….|…….|
Bob…..Sally…Peter…James

Then if John again fills up his 2nd matrix before everyone else,
he goes to the next available slot of his referrer, which is still
under Sue….

………………………….Soul
…………….|……………………………..|
…………..John………………………..Sue
……..|……………|………………..|……………..|
……Bill………….Ken……………John (2nd)…John (3rd)
.|……….|…….|…….|…………..|…..|
Bob…..Sally…Peter…James……Sam…Nick
……………………………………|..|…|..|
…………………………………..A..B…C.D

10) Now look at this very carefully. Once John gets his 3rd account, SOUL WILL HAVE A COMPLETE 2×2, SO SOUL WILL HAVE A NEW ACOUNT IN THE NEXT AVAILABLE SLOT OF HIS SPONSOR. If he is company direct, a new company direct head for Soul will be created.

11) Then if John completes his 3rd account, he will go to the next available open slot of his sponsor Soul, which is at the 2nd account of Soul…

…Soul (2nd acct)
….|
John (4th acct)

12) Now here’s the vital mechanic about the recurring payment… if Soul recurs payment after the examply in (11), his new slot will not go under Soul 02 because our rule is RECURRING PAYMENTS DO NOT GO UNDER A MEMBER’S PREVIOUS TRIANGLE. Thus for the recurring payment, Soul will have a new separate 03. The same is true with John. His new slot from recurring payment (his 5th slot), will not go under Soul’s 2nd account, but in the account of Soul that recurred for the second time, which is Soul 03. So the recurred diagram for them is…

…Soul (3rd acct)
….|
John (5th acct)

In other words, a person’s 2nd month recurring will follow his sponsor’s 2nd month slot as well. A person’s 3rd month recurring will follow his sponsor’s 3rd month recurring as well, and so on.

I hope the above scenario is clear in developing the logic and algorithms for this script. Please message me if you have any questions. Thank you.

I have a range of programming and layout issues www.automax.tv
I’ve numbered 1-3 of what needs to be done to fix these issues
This project will suit a programmer that has good programming experience along with xhtml/css coding exp. You will struggle if you don’t have these skills.

1) Attached is this re-occuring error message that I get.
Need to know what this is, and then fixed.

2) Homepage Fixes
a) The homepage automax.tv doesn’t align well in bigger resolutions above 1280 in both Internet Explorer and Firefox.
b) The text and Header tags need to be fixed sized.
c) The Random Video doesn’t play in Internet Explorer
d) The text doesn’t align correctly on homepage and some parts get cut off.

3) There are alignment issues with the text on search result pages, tags and profile pages.
Additionally the banner and some other images don’t show.

Doesn’t really matter the theme. I was thinking a pirate or mafia type them. Doesn’t make a difference. If I wanna do another theme I wanna be able to change the graphics and what not easily. What I was like to try and do is a clone of FatalPlay.com. You can sign up for free and look around to see if your able on doing this project. I wanna try and get it as close as possible with other features added on. Like Gang Wars, etc… I’m not to sure how much this runs but I’m thinking around $300-$600 if more we can talk more about it. If you need anymore info mail me. This game also has Admins, Game Moderators, Forums Moderators and a Admin Panel with permission set for the GM and FM and any other things. Like, Message Logs, Item Transfer Logs. Doesn’t have to be heavily coded just something nice and simple like FatalPlay.