Get a Freelance Job

Http://www.oldseng.com/about-us/meet-our-people/
http://www.oldseng.com/our-projects/

Hello, we would like someone to make a fix to the sliders located at the links above. Currently, the back arrow lags by one person/project. So, if you scroll forward with the forward arrow and then hit the back arrow, it will have the wrong bio. We would like this to either be fixed is possible and if not, we just want to remove the back arrow all together.

Thank you,
Brianna

Http://www.oldseng.com/about-us/meet-our-people/
http://www.oldseng.com/our-projects/

Hello, we would like someone to make a fix to the sliders located at the links above. Currently, the back arrow lags by one person/project. So, if you scroll forward with the forward arrow and then hit the back arrow, it will have the wrong bio. We would like this to either be fixed is possible and if not, we just want to remove the back arrow all together.

Thank you,
Brianna

We have small task, but need it badly

we changed our category structure to a dropdown in header bit want it to have a pointing arrow with something like start here.

I alreasy looked for several options but cannot find a suitable arrow (best is a flashing one) pointing up to the categories dropdown with a text next to it start here

i privide a sort of example, the arrow is animated gif, so cannot rotate it up

Need a flash guru to get two task on my current flash drawing application done:

#1 – Changing Exit/Close Button of the application:
Right now when clicking on Exit/Close the application saves the drawing as well and after saving it directs the user to overview page of all drawings. I need that changed so that it doesnt save when clicking on Exit/Close. The user is directed to the overview page without saving.

#2 – Flip function:
I need a flip function for the arrows available in the application. Means when adding an arrow on the drawing area there should be a button shown (when an arrow is marked) which should flip the view of the arrow either ot the left or the right.

Hello,

I would like a very simple Custom Indicator (UP & DOWN Arrows) for MT4. I currently have a custom EA that places Renko charts on MT4. The UP & DOWN Arrows would appear when a Renko “brick” closes on the other side of an Exponential Moving Average and the Stochastic has crossed up and is above 20 for an UP Arrow or crossed down and is below 80 for a Down Arrow. That’s it! The indicator must allow the adjusting of Renko brick ranges, the EMA and Stochastic values. I would also like to adjust the color and size of the arrows too. Once an arrow appears it must stay on the chart. My platform uses 5 decimal points.

I would be happy to send you the Renko EA it’s free on ForexFactory.com (RenkoLiveChart_v3.0.mq4). I look forward to your quote.

Thank you in advance.
Shawn

We have a Flash / Java / XML menu which is 75% done but needs the following modifications. The native files are attached. The menu must maintain the current design so the user can update this by editing the XML and replacing images.

Regarding the functionality:

When the user mouses over a number (referred to as mouse-over or mouse-on), even without clicking (referred to as mouse-down), that number should become instantly highlighted and that number’s corresponding slide/art should appear. Then when the user clicks (mouses-down) on the number, they go to the linked page.(just like when they click the slide/art itself). Essentially we’re looking for what is commonly called a “rollover” effect where the white tab or box surrounds the number when you just “rollover” it.

Regarding design:

The pause and play buttons, and the right and left arrow buttons, are not equal distances from each other. The left arrow appears one or two pixels closer to the pause/play buttons than the right arrow. I’m pretty sure these were all equal distances and symmetrical when I sent the Photoshop file over. These elements should be equally spaced.

We would like to kick off this project in the next 24 hours, and have revised file by mid-day Friday, 2/19/2010. Please provide firm flat rate bid for this work, based on this timeline.

We have a Flash / Java / XML menu which is 75% done but needs the following modifications. The native files are attached. The menu must maintain the current design so the user can update this by editing the XML and replacing images.

Regarding the functionality:

When the user mouses over a number (referred to as mouse-over or mouse-on), even without clicking (referred to as mouse-down), that number should become instantly highlighted and that number’s corresponding slide/art should appear. Then when the user clicks (mouses-down) on the number, they go to the linked page.(just like when they click the slide/art itself). Essentially we’re looking for what is commonly called a “rollover” effect where the white tab or box surrounds the number when you just “rollover” it.

Regarding design:

The pause and play buttons, and the right and left arrow buttons, are not equal distances from each other. The left arrow appears one or two pixels closer to the pause/play buttons than the right arrow. I’m pretty sure these were all equal distances and symmetrical when I sent the Photoshop file over. These elements should be equally spaced.

We would like to kick off this project in the next 24 hours, and have revised file by mid-day Friday, 2/19/2010. Please provide firm flat rate bid for this work, based on this timeline.

I already have an expert advisor that works very well, but would like to add one more indicator, using it two times (two different settings ) to enhance it even more – I use this indicator with the two different settings to make manual trades which works out great – I have the ea and indicator in both mq4 and ex4 formats – the expert advisor would not open a position until all of the present settings and the three new settings were VALID – each new variation of the custom indicator could be used or not used (True/False) as is the same with all the other settings of my expert advisor -

take a look at the chart pic of EA and indicators I have uploaded to be completely positive that this project is something you can do without any problems – do not bid if you cannot do this – no escrow release until the EA works PERFECTLY!! No exceptions!

Each arrow indicator works independently, but just as all other settings of the EA work independently to show VALID or NOT VALID, they all work together when enabled (TRUE) – when an arrow indicates a LONG trend, from either arrow indicator, then the EA will show this:

For example:
ARROW1 FOR OPEN = LONG
ARROW1 FOR CLOSE = SHORT
ARROW2 FOR OPEN = LONG
ARROW2 FOR CLOSE = SHORT

Once a trend changes direction to SHORT and an arrow shows that change, they will show this:
ARROW1 FOR OPEN = SHORT
ARROW1 FOR CLOSE = LONG
ARROW2 FOR OPEN = SHORT
ARROW2 FOR CLOSE = LONG

Both arrow indicators are enabled by either TRUE or FALSE

Need a MT4 programmer to build an expert advisor and manual indicator.

Attached is an image that shows where I need 5 CSS tweaks done.

1. In the upper header two red arrows point to the user name, and the world “Logout” – those both need to be white FFFFFF.

2. In the lower area one arrow points to a blue line and one to a grey line. Both need to be FFFFFF. Disregard the arrow pointing to the right.

3. The green arrow points to a white area where the word “Search” is in white. It needs to match the color and font of the word “Books” to the right.

The CSS in the header is probably in my custom.css or style.css file.

The CSS below is part of an Amazon aStore and the CSS can be overriden through a logon to my Amazon affiliate section which I have.

Please don’t bid unless you’re 100% certain you can do the project. Please use the word HAGAJI in your reply so I know you read this and understand the project. I delete replies without HAGAJI – sorry.

Attached is an image that shows where I need 5 CSS tweaks done.

1. In the upper header two red arrows point to the user name, and the world “Logout” – those both need to be white FFFFFF.

2. In the lower area one arrow points to a blue line and one to a grey line. Both need to be FFFFFF. Disregard the arrow pointing to the right.

3. The green arrow points to a white area where the word “Search” is in white. It needs to match the color and font of the word “Books” to the right.

The CSS in the header is probably in my custom.css or style.css file.

The CSS below is part of an Amazon aStore and the CSS can be overriden through a logon to my Amazon affiliate section which I have.

Please don’t bid unless you’re 100% certain you can do the project. Please use the word HAGAJI in your reply so I know you read this and understand the project. I delete replies without HAGAJI – sorry.

I need to create an EA the enters trade based on the agreement of a number of MT4 custom indicators (6-8). Basically
1- Entry: when all indicators agree enter long/short position. Place stop loss at the value of one of the indicators or at highes high 2/lowest low 2 (this will be decided later)
2- Exit: the Ea should manage the trade after initializing it. The exit will be based on one of the custom indicators. The indicator paint an arrow (up or down) I need the EA to move the stop to the low or high of the bar where the first arrow appears after the trade is open. If a new arrow appeared the EA will repeat the process.

Important Notes:
1- The indicator print arrow up/down intra-bar i.e. before the bar close. The EA should be “wise enough” to act on the signal only after the current bar close moving the stop to the low of the bar if there is an open long trade and there is an arrow after the bar close and moving the stop to the high of the bar if there is an open short trade and there is an up arrow after the bar close..
2- The trade will have an initial stop loss and might have a profit target. The EA should act moving the stop according to the rules regardless of wether the trade have a profit target or not and overwriting the current stop loss.
3- The EA should be wise enough also to act only if there is an open trade long or short, if there is no trade the EA shouold do nothing.

I need to create an EA for MT4 to manage my trade after I open it. The EA will be based on a custom indicator. The indicator paint an arrow (up or down) I need the EA to move the stop to the low or high of the bar where the first arrow appears after the trade is open. If a new arrow appeared the EA will repeat the process.

Important Notes:
1- The indicator print arrow up/down intra-bar i.e. before the bar close. The EA should be “wise enough” to act on the signal only after the current bar close moving the stop to the low of the bar if there is an open long trade and there is an arrow after the bar close and moving the stop to the high of the bar if there is an open short trade and there is an up arrow after the bar close..
2- The trade will have an initial stop loss and might have a profit target. The EA should act moving the stop according to the rules regardless of wether the trade have a profit target or not and overwriting the current stop loss.
3- The EA should be wise enough also to act only if there is an open trade long or short, if there is no trade the EA shouold do nothing.

I wish to program an EA based on an arrow indicator

basic open trade:
buy: Arrow green
Sell: Arrow red
mm enable
can be use for 0.01 lot and 4-5 digit
open based on current TF
can be use for all pair

close trade
1. SL
2. When next arrow start to change position
3. Breakeven
4. 2 level of TP
5. trialing stop

I need to someone to help create a simple MT4 indicator in Metaquote language. The indicator should simple draw an up arrow if we have to consecutive closes above both 10 EMA (exponential moving average) and 20 EMA, and a down arrow if we have 2 consecutive closes below both 10 EMA and 20 EMA. Preferable the length of the 2 moving averages are as input. In mathematical form:

C0: current candle, C1: close of one candle earlier, C2 close of two candle earlier, C3 close of 3 candles earlier

Up arrow:

C1>10EMA and C1>20EMA and C2>10EMA and C2>20EMA and C3<10EMA or C3<20EMA

Down arrow:

C1<10EMA and C1<20EMA and C2<10EMA and C2<20EMA and C3>10EMA or C3>20EMA

Trigger on candle close only if possible, i.e. when a new candle opens (C0) the indicator check C1, C2 and C3 conditions.

Please quote price and time.

Best Regards,

See my attached mockup for the starting point of the header graphics I need made. You can use this mockup to determine actual size.

1. I need you to make three simple buttons as shown, and you will need to give them the Apple/Mac reflection affect and curved 3D illusion as seen in the Safari thumbnail page browser (as mocked up at http://www.apple.com/safari/ in the first slide upon page load. The buttons must have same rollover affects as the live safari buttons.

2. Though Safari shows their page buttons as four across, I of course want only three, so please center the curve on the middle button.
3. In my mockup, I show sub-text in each button that will instead show that text as the rollover affect centered below the three buttons per the Safari rollover affect.
4. Do not include the sub-text on the button, as it’s only on the mockup for convenience to show you the text that should appear centered below on rollover. So only the two words and an arrow on each button.
5. Please create a new arrow to use for all three buttons. That arrow is a bad graphic.
6. Likewise, I’ll want my logo to have the matching reflection affect, but no rollover affects are needed.

My team will install the header and connect the links to the buttons and the logo.

Please PMB if you have any questions. This must be a quick job.

Cheers!

See my attached mockup for the starting point of the header I need made. You can use this mockup to determine actual size.

1. I need you to make three simple buttons as shown, and you will need to give them the Apple/Mac reflection affect and curved illusion exactly as seen in the Safari page browser, and mocked up at http://www.apple.com/safari/ (in the first slide upon page load) but they must function as the live safari buttons function.

2. Where Safari show a their page buttons as four items across, I of course want only three, centering the curve on the middle button.
3. Rollover and click affects should match Safari’s functions in the live browser
4. In my mockup, I show sub-text in each button that will instead show that text as the rollover affect centered below the three buttons per the Safari rollover affect, but do not include that text on the button. I want only the main words and an arrow
5. Please create a new arrow to use for all three buttons. That arrow is a bad graphic.
6. Likewise, I’ll want my logo to have the matching reflection affect, but no rollover affects are needed.

My team will install the header and connect the links to the buttons and the logo.

Please PMB if you have any questions. This must be a quick job.

Cheers!

I am re-posting this job because the last programmer was unable to do the artwork portion of the job.

Land Speed Racing Flash Game

I need a simple flash game built. The game will be about land speed racing based on the famous photograph of Rollie Free.

Rollie Free was a motorcycle rider who stripped down to just swim trunks, boots, and helmet and rode laying flat on a motorcycle so that he could go faster. See picture I have attached.

The basic features of the game should be:

The game should start with Rollie fully clothed (leather jacket, leather pants, helmet, boots, gloves) sitting at the starting line waiting to go. There should be a slightly portly person in white shirt, blue shorts, white hat that says SCTA on it, with a white beard and mustache. His shirt should say

Land Speed Racing Flash Game

I need a simple flash game built. The game will be about land speed racing based on the famous photograph of Rollie Free.

Rollie Free was a motorcycle rider who stripped down to just swim trunks, boots, and helmet and rode laying flat on a motorcycle so that he could go faster. See picture I have attached.

The basic features of the game should be:

The game should start with Rollie fully clothed (leather jacket, leather pants, helmet, boots, gloves) sitting at the starting line waiting to go. There should be a slightly portly person in white shirt, blue shorts, white hat that says SCTA on it, with a white beard and mustache. His shirt should say

Hello,

- I want to develope a flash application (AS 3.0)

That can show an “arrow” when the webcamera is looking at a certain symbol on a pice of paper.

The arrow should be in 3D and we should be able to set the direction to were is pointing in 360 degrees using an external .xml file.

- Information on how to build this with Adobe Flash is here:

http://labs.adobe.com/technologies/alchemy/
http://www.artoolworks.com/osgART_-_Gallery.html
http://studierstube.icg.tu-graz.ac.at/handheld_ar/artoolkitplus.php
http://drawlogic.com/2008/11/17/as3-augmented-reality-in-flash-and-papervision-3d-flartoolkit/
http://www.mikkoh.com/blog/

Best regards,
Johan

The required indicator is based on AlphaTrend &amp; EMA 12,26 (both attached) which filter each other.

See the attached zip files containing all the pictures.
Description for the pictures in ‘Finished Product’ file (i.e. how the indicator should trade) is given below:

- BUY SIGNAL – When a BLUE ARROW appears first, supported by BLUE BARS or when a BLUE BAR appears first, supported by a BLUE ARROW
- SELL SIGNAL – When a RED ARROW appears first, supported by RED BARS or when a RED BAR appears first, supported by a RED ARROW

All others should be ignored as false signals. They are marked with the ‘x’ sign while the red vertical lines are the correct signals for BUY/SELL.

Now, I’ve coded the first condition whereby if the AlphaTrend changes color first before the EMA Arrow appears after, the required indicator will show a new arrow. The picture file named ‘Half-done Product’ shows what was achieved and the 2nd condition to be added.

I also attached the half-done indicator so all that’s needed is to add this 2nd condition:
If the EMA Signal Arrow appears first and the AlphaTrend changes color to match the EMA afterwards, the new indicator should also appear to show there’s an agreement. The 2 conditions apply to buy &amp;amp; sell and only alert when a candle closes.

I need your best quote please. If we can arrive at the right price with complete job satisfaction, we’ll go for 2 EA projects.
Duration requested: 24-48 hours max.

I am looking for a programmer to develop a sophisticated website for my company. My company is called iCustom and we create protective skins for an assortment of electronics are also looking for the development of a logo for our company. The website will incorporate the following capabilities:

The Homepage:
If you visit www.brandstudio.ru, you will be able to see how we would like for some of the features on our site to be. Then click on WEB, and then on Lexus RX 2008. We would like the homepage to have six (6) links, inside of six (6) individual hexagon shaped boxes and 1 hexagon box will be empty. The boxes will follow a users mouse whenever the user moves their arrow. The links will follow the arrow anywhere it goes around our page. The links within each hexagon will be: About Us, Devices, Gallery, Help, Comments and Contact Info.
We have a particular picture that we would like to be the wallpaper for our homepage. When we choose which programmer(s) we will work with then more details will be given about the specifics of this site. The iCustom logo should be located in the center of the page based on the design of the wallpaper that we have.

About Us Link:
This link will redirect users to the webpage that will have information about the history of iCustom, who we are and our overall goals. The management of iCustom will prepare this information that is to be uploaded to this page. A tab will be located at the top left corner of every one of our web pages. When the tab is clicked, the hexagonal shaped boxes containing the links will reappear and follow the users mouse movement around the page.

Devices Link:
This link will contain the images of the specific devices that we create our personalized skins for.
I am looking for a programmer to develop a sophisticated website for my company. My company is called iCustom and we create protective skins for an assortment of electronics are also looking for the development of a logo for our company. The website will incorporate the following capabilities, but we would like to put them in more creative way:
PhonesLaptopsMP3 PlayersPDA
AppleAcerAppleBlackberry
AudiovoxAppleArchosDell
BlackberryASUSCreative LabsHP
BoostDelliRiverPC Edge
T-Mobile SidekickHPLattePalm
GoogleVerified by IntelPhilipsRIM
KyoceraLenovoRio
LGSamsungSamsung
MotorolaSonySanDisk
NokiaToshibaSony
PalmGatewayZune
Panasonic
Pantech
Philips
RIM
Sagem
Samsung
Sanyo
Sharp
Siemens
Sony Erocsson
Toshiba
T-mobile

Gallery Link:
The gallery link should display what devices we offer as well as some designs we have for these devices. Once again take a look at the www.brandstudio.ru website and click on the link that says WEB. After clicking this link, several options will come up showing the name and models of different vehicles. Go to the Lexus GS 450H and click on that link. It shows a variety of colors list vertically. This particular feature allows for a user to change the color of the vehicle by simply moving their mouse arrow up and down the screen. No clicking is needed. We would like to apply this same feature to our website but to the specific devices we offer. We would list the colors/artwork listed horizontally and list the electronic devices (iPhone 3G, blackberry, etc) vertically. We would like to be able to simply slide our mouse horizontally and be able to see different iCustom design on the device, without clicking a button. This slide ability feature should work horizontally to view different designs as well as vertical to change devices.

Help Link:
This link will redirect users to a page where frenquently asked questions are answered.
We would like to set up an email accounts through this website.

More informaton will be provided after we choose which developer/programmer we will work with.

I need an html file template that is very similar to the link below:

http://masscontrolsite.com/desire.php

I am just looking for the format of that page, not looking to copy the exact page…just an example. I would like it divided into two columns , the left for the video player, which is more room, and divided on the right for the arrow (want a different arrow) pointing down to the aweber opt in box. I would like the arrow graphic to be one of those arrows that looks like it was hand drawn on the paint application. I would also need help making the opt in box that links to my aweber look like the one on the page where I can put a custom buttom that sends Send, similar to the one in the page.

Simple project, but need it asap done with 24 hours. When you bid please let me know if you have any samples of html files that are similar to this so I can look at them and pick you…

I need an Xsite Pro file completed in the file format .xse

I need a template that looks like this page:
http://masscontrolsite.com/desire.php

I am just looking for the format of that page, not looking to copy the exact page…just an example. I would like it divided into two columns , the left for the video player, which is more room, and divided on the right for the arrow (want a different arrow) pointing down to the aweber opt in box. I would like the arrow graphic to be one of those arrows that looks like it was hand drawn on the paint application. I would also need help making the opt in box that links to my aweber look like the one on the page where I can put a custom buttom that sends Send, similar to the one in the page.

Not very complex, just need it in a xsite file so I can import it and edited it in the future when i need.

Hello,
I want a flashing arrow graphic for my website. I want the arrow to be very attractive and professional looking. I want it to point at my sign up buttons and opt-in button.

You will install!!

Please have sample and good feedback. project must be done within 1 day.